Driver stampante Lexmark X4850 non nell'elenco

Ecco qui l’output:

[code]Roberto@localhost ~$ su
Password:
root@localhost Roberto# fdisk -l

Disk /dev/sda: 320.1 GB, 320072933376 bytes, 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Identificativo disco: 0x000d6346

Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 2048 77377535 38687744 83 Linux
/dev/sda2 349698046 625141759 137721857 5 Esteso
Partition 2 does not start on physical sector boundary.
/dev/sda3 77377536 336414719 129518592 83 Linux
/dev/sda4 336414720 349695999 6640640 82 Linux swap / Solaris
/dev/sda5 447305728 529225727 40960000 83 Linux
/dev/sda6 349702144 350726143 512000 83 Linux
/dev/sda7 350728192 445272063 47271936 83 Linux
/dev/sda8 445274112 447297535 1011712 82 Linux swap / Solaris
/dev/sda9 529227776 625141759 47956992 83 Linux

Le voci nella tabella delle partizioni non sono nello stesso ordine del disco
root@localhost Roberto# [/code]

[quote=Ito]L’output a mio avviso è ok, anch’io ne ottengo uno del tutto simile
se collego la mia Lexmark Pro805 al pc tramite USB.
La stampante ti consente l’accesso diretto alla memoria interna, dove puoi salvare
foto e documenti per una successiva stampa[/quote]
bene era quanto volevo sapere,

@Marvolo93
vorrei fare una prova, se sei daccordo:

  1. togli la presa usb della stampante:

  2. da utente:

$ mkdir lexmark
$ cd lexmark
$ wget http://software.rachaelbond.com/CJLZ600LE-CUPS-1.0-1.TAR.gz
$ tar xzvf CJLZ600LE-CUPS-1.0-1.TAR.gz
$ tail -n +143 z600cups-1.0-1.gz.sh > install.tar.gz
$ tar -xvzf install.tar.gz
$ su
password_di_root
# yum localinstall z600cups-1.0-1.i386.rpm z600llpddk-2.0-1.i386.rpm

se la procedura ti da errore fermati e posta la segnalazione, se invece non da errori :

# systemctl restart cups.service 
  1. rimetti la presa usb della stampante, poi sempre da root:
# system-config-printer

quando ti permette di scegliere i driver , scegli quelli della Z600, poi concludi la procedura.

  1. prova a stampare.

Sono daccordo e comincio la procedura (Grazie mille per l’impegno):

[code]Roberto@localhost ~$ mkdir lexmark
Roberto@localhost ~$ cd lexmark
Roberto@localhost lexmark$ wget http://software.rachaelbond.com/CJLZ600LE-CUPS-1.0-1.TAR.gz
–2013-04-09 13:24:44-- http://software.rachaelbond.com/CJLZ600LE-CUPS-1.0-1.TAR.gz
Risoluzione di software.rachaelbond.com (software.rachaelbond.com)… 92.48.124.25
Connessione a software.rachaelbond.com (software.rachaelbond.com)|92.48.124.25|:80… connesso.
Richiesta HTTP inviata, in attesa di risposta… 200 OK
Lunghezza: 4301167 (4,1M) [application/x-gzip]
Salvataggio in: “CJLZ600LE-CUPS-1.0-1.TAR.gz”

100%======================================>] 4.301.167 125KB/s in 58s

2013-04-09 13:25:42 (73,0 KB/s) - “CJLZ600LE-CUPS-1.0-1.TAR.gz” salvato [4301167/4301167]

Roberto@localhost lexmark$ tar xzvf CJLZ600LE-CUPS-1.0-1.TAR.gz
COPYING
README
z600cups-1.0-1.gz.sh
Roberto@localhost lexmark$ tail -n +143 z600cups-1.0-1.gz.sh > install.tar.gz
Roberto@localhost lexmark$ tar -xvzf install.tar.gz
globals.tcl
install
lexinstall
lexinstall.tcl
license
setup.tcl
testpage
usb.tcl
xlexinstall
xlexinstall.tcl
z600cups-1.0-1.i386.rpm
z600llpddk-2.0-1.i386.rpm
[/code]

Poi ho effettuato il local install:

[code]Roberto@localhost lexmark$ su
Password:
root@localhost lexmark# yum localinstall z600cups-1.0-1.i386.rpm z600llpddk-2.0-1.i386.rpm
Plugin abilitati:fastestmirror, langpacks, presto, refresh-packagekit
Analisi di z600cups-1.0-1.i386.rpm: z600cups-1.0-1.i386
z600cups-1.0-1.i386.rpm contrassegnato per l’installazione
Analisi di z600llpddk-2.0-1.i386.rpm: z600llpddk-2.0-1.i386
z600llpddk-2.0-1.i386.rpm contrassegnato per l’installazione
Risoluzione dipendenze
–> Esecuzione del controllo di transazione
—> Pacchetto z600cups.i386 0:1.0-1 settato per essere installato
—> Pacchetto z600llpddk.i386 0:2.0-1 settato per essere installato
–> Risoluzione delle dipendenze completata

Dipendenze risolte

================================================================================
Package Arch Versione Repository Dim.

Installazione:
z600cups i386 1.0-1 /z600cups-1.0-1.i386 214 k
z600llpddk i386 2.0-1 /z600llpddk-2.0-1.i386 9.5 M

Riepilogo della transazione

Install 2 Pacchetto

Dimensione totale: 9.7 M
Dimensione installata: 9.7 M
Procedere [s/N]: s
Download dei pacchetti:
Esecuzione del controllo di transazione
Test di transazione in corso
Test di transazione eseguito con successo
Transazione in corso
Installazione : z600llpddk-2.0-1.i386 1/2
Installazione : z600cups-1.0-1.i386 2/2
/var/tmp/rpm-tmp.uBYdC5: line 1: /etc/init.d/cups: File o directory non esistente
avvertimento: scriptlet %post(z600cups-1.0-1.i386) fallita, uscita con stato 127
Non-fatal POSTIN scriptlet failure in rpm package z600cups-1.0-1.i386
Verifica in corso : z600cups-1.0-1.i386 1/2
Verifica in corso : z600llpddk-2.0-1.i386 2/2

Installato:
z600cups.i386 0:1.0-1 z600llpddk.i386 0:2.0-1

Completo!
root@localhost lexmark#
[/code]
Seppure la procedura è stata completata mi sono fermato per questo:

/var/tmp/rpm-tmp.uBYdC5: line 1: /etc/init.d/cups: File o directory non esistente avvertimento: scriptlet %post(z600cups-1.0-1.i386) fallita, uscita con stato 127 Non-fatal POSTIN scriptlet failure in rpm package z600cups-1.0-1.i386
Proseguo con il tuo benestare?

prosegui

Ottimo, stasera dovrei sapere se tutto ha funzionato! :slight_smile:

perché stasera ?

Stampante a casa mentre io sono all’università! Per questo sono molto lento a rispondere! :smiley:

attendo con impazienza.

Non ha funzionato. :frowning:

bene.

hai la stampante sottomano ?

No. Non vorrei darti mai l’illusione che cercare una soluzione sarà roba veloce. Se vuoi procedere, dammi pure le istruzioni! Le eseguirò volentieri!

facci vedere:

[code]# sealert --lookupid *

tree /etc/cups

cat /etc/cups/cupsd.conf

cat /etc/cups/printers.conf

lpoptions[/code]

Con il collegamento alla stampante?

hai detto che non hai la stampante sottomano, quindi…
intendo così com’è ora il sistema.

Ottimo, eccoci qui:

[code]Roberto@localhost ~$ su
Password:
root@localhost Roberto# sealert --lookupid *
Error
query_alerts error (1003): id (Documenti) not found
root@localhost Roberto# tree /etc/cups
/etc/cups
|-- classes.conf
|-- client.conf
|-- cupsd.conf
|-- cupsd.conf.default
|-- cups-files.conf
|-- interfaces
|-- lpoptions
|-- paps.convs
|-- ppd
| -- 4800-Series.ppd |-- printers.conf |-- printers.conf.O |-- snmp.conf |-- ssl |-- subscriptions.conf – subscriptions.conf.O

3 directories, 13 files
root@localhost Roberto# cat /etc/cups/cupsd.conf
MaxLogSize 0

“$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $”

Sample configuration file for the CUPS scheduler. See “man cupsd.conf” for a

complete description of this file.

Log general information in error_log - change “warn” to “debug”

for troubleshooting…

LogLevel warn

Only listen for connections from the local machine.

Listen localhost:631
Listen /var/run/cups/cups.sock

Show shared printers on the local network.

Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseLocalProtocols CUPS dnssd

Default authentication type, when authentication is required…

DefaultAuthType Basic

Web interface setting…

WebInterface Yes

Restrict access to the server…

Order allow,deny

Restrict access to the admin pages…

<Location /admin>
Order allow,deny

Restrict access to configuration files…

<Location /admin/conf>
AuthType Default
Require user @SYSTEM
Order allow,deny

Set the default printer/job policies…

# Job/subscription privacy... JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default

Job-related operations must be done by the owner or an administrator…

Order deny,allow Require user @OWNER @SYSTEM Order deny,allow

All administration operations require an administrator to authenticate…

AuthType Default Require user @SYSTEM Order deny,allow

All printer operations require a printer operator to authenticate…

AuthType Default Require user @SYSTEM Order deny,allow

Only the owner or an administrator can cancel or authenticate a job…

Require user @OWNER @SYSTEM Order deny,allow Order deny,allow

Set the authenticated printer/job policies…

# Job/subscription privacy... JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default

Job-related operations must be done by the owner or an administrator…

AuthType Default Order deny,allow AuthType Default Require user @OWNER @SYSTEM Order deny,allow

All administration operations require an administrator to authenticate…

AuthType Default Require user @SYSTEM Order deny,allow

All printer operations require a printer operator to authenticate…

AuthType Default Require user @SYSTEM Order deny,allow

Only the owner or an administrator can cancel or authenticate a job…

AuthType Default Require user @OWNER @SYSTEM Order deny,allow Order deny,allow

End of “$Id: cupsd.conf.in 9407 2010-12-09 21:24:51Z mike $”.

root@localhost Roberto# cat /etc/cups/printers.conf

Printer configuration file for CUPS v1.5.4

Written by cupsd on 2013-04-10 09:54

DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING

<Printer 4800-Series>
UUID urn:uuid:43bc664d-c178-37b7-6651-a4accc4fbded
Info 4800-Series
MakeModel Lexmark Z600 v1.0-1
DeviceURI usb://Lexmark/4800%20Series?serial=16Z018034198019&interface=1
State Stopped
StateMessage Unplugged or turned off
StateTime 1365525186
Reason paused
Type 8425484
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer

root@localhost Roberto# lpoptions
root@localhost Roberto#
[/code]

ancora:

# grep "SELinux is preventing" /var/log/messages

root@localhost Roberto# grep "SELinux is preventing" /var/log/messages Apr 9 10:54:45 localhost setroubleshoot: SELinux is preventing /usr/lib64/nspluginwrapper/plugin-config from 'read, write' accesses on the chr_file /dev/ptmx. For complete SELinux messages. run sealert -l 2d7dee71-03f8-4c1e-8fb2-f52baff77ffa Apr 9 13:22:54 localhost setroubleshoot: SELinux is preventing /usr/lib64/nspluginwrapper/plugin-config from 'read, write' accesses on the chr_file /dev/ptmx. For complete SELinux messages. run sealert -l 2d7dee71-03f8-4c1e-8fb2-f52baff77ffa root@localhost Roberto#

bene.
ancora:

# cat /etc/cups/ppd/4800-Series.ppd

[code]root@localhost Roberto# cat /etc/cups/ppd/4800-Series.ppd
*PPD-Adobe: “4.3”
*FormatVersion: “4.3”
*FileVersion: “1.0”
*LanguageVersion: English
*LanguageEncoding: ISOLatin1
*PCFileName: “LXZ600CJ.PPD”
*Manufacturer: “Lexmark”
*Product: “(CUPS v1.1)”
*cupsVersion: 1.1
*cupsManualCopies: True
*cupsModelNumber: 1
*cupsFilter: “application/vnd.cups-raster 0 rastertoz600”
*ModelName: “Lexmark Z600 Color Jetprinter”
*ShortNickName: “Lexmark Z600”
*NickName: “Lexmark Z600 v1.0-1”
*PSVersion: “(3010.000) 550”
*PSVersion: “(3010.000) 651”
*PSVersion: “(3010.000) 652”
*LanguageLevel: “3”
*ColorDevice: True
*DefaultColorSpace: RGB
*FileSystem: False
*Throughput: “15”
*LandscapeOrientation: Plus90
*VariablePaperSize: False
*TTRasterizer: Type42

*OpenUI *PageSize/Media Size: PickOne
*OrderDependency: 20 AnySetup *PageSize
*DefaultPageSize: A4
*PageSize Letter/Letter: “<</PageSize[612 792]/ImagingBBox null>>setpagedevice”
*PageSize A4/A4: “<</PageSize[595 842]/ImagingBBox null>>setpagedevice”
*PageSize Statement/Statement: “<</PageSize[396 612]/ImagingBBox null>>setpagedevice”
*PageSize Legal/Legal: “<</PageSize[612 1008]/ImagingBBox null>>setpagedevice”
*PageSize B5/B5: “<</PageSize[516 729]/ImagingBBox null>>setpagedevice”
*PageSize Executive/Executive: “<</PageSize[522 756]/ImagingBBox null>>setpagedevice”
*PageSize A5/A5: “<</PageSize[420 595]/ImagingBBox null>>setpagedevice”
*PageSize A6Cardstock/A6 Cardstock: “<</PageSize[298 420]/ImagingBBox null>>setpagedevice”
*PageSize IndexCard3X5/Index Card 3x5: “<</PageSize[216 360]/ImagingBBox null>>setpagedevice”
*PageSize Postcard4X6/Postcard 4x6: “<</PageSize[288 432]/ImagingBBox null>>setpagedevice”
*PageSize Hagaki/Hagaki: “<</PageSize[283 420]/ImagingBBox null>>setpagedevice”
*PageSize Envelope634/Envelope 6 3/4: “<</PageSize[261 468]/ImagingBBox null>>setpagedevice”
*PageSize Envelope9/Envelope #9: “<</PageSize[279 639]/ImagingBBox null>>setpagedevice”
*PageSize Envelope10/Envelope #10: “<</PageSize[297 684]/ImagingBBox null>>setpagedevice”
*PageSize EnvelopeDL/Envelope DL: “<</PageSize[312 624]/ImagingBBox null>>setpagedevice”
*PageSize EnvelopeC5/Envelope C5: “<</PageSize[459 649]/ImagingBBox null>>setpagedevice”
*PageSize EnvelopeC6/Envelope C6: “<</PageSize[323 459]/ImagingBBox null>>setpagedevice”
*PageSize EnvelopeB5/Envelope B5: “<</PageSize[499 708]/ImagingBBox null>>setpagedevice”
*PageSize Envelope734/Envelope 7 3/4: “<</PageSize[279 540]/ImagingBBox null>>setpagedevice”
*PageSize A2Baronial/A2 Baronial: “<</PageSize[315 414]/ImagingBBox null>>setpagedevice”
*PageSize Chokei3/Chokei 3: “<</PageSize[340 666]/ImagingBBox null>>setpagedevice”
*PageSize Chokei4/Chokei 4: “<</PageSize[255 581]/ImagingBBox null>>setpagedevice”
*PageSize Chokei40/Chokei 40: “<</PageSize[255 638]/ImagingBBox null>>setpagedevice”
*PageSize Kakugata3/Kakugata 3: “<</PageSize[612 785]/ImagingBBox null>>setpagedevice”
*PageSize Kakugata4/Kakugata 4: “<</PageSize[558 757]/ImagingBBox null>>setpagedevice”
*PageSize Kakugata5/Kakugata 5: “<</PageSize[539 680]/ImagingBBox null>>setpagedevice”
*PageSize Kakugata6/Kakugata 6: “<</PageSize[459 649]/ImagingBBox null>>setpagedevice”
*PageSize L/L: “<</PageSize[252 360]/ImagingBBox null>>setpagedevice”
*PageSize 2L/2L: “<</PageSize[360 505]/ImagingBBox null>>setpagedevice”
*CloseUI: *PageSize

*OpenUI *PageRegion: PickOne
*OrderDependency: 10 AnySetup *PageRegion
*DefaultPageRegion: A4
*PageRegion Letter/Letter: “<</PageSize[612 792]/ImagingBBox null>>setpagedevice”
*PageRegion A4/A4: “<</PageSize[595 842]/ImagingBBox null>>setpagedevice”
*PageRegion Statement/Statement: “<</PageSize[396 612]/ImagingBBox null>>setpagedevice”
*PageRegion Legal/Legal: “<</PageSize[612 1008]/ImagingBBox null>>setpagedevice”
*PageRegion B5/B5: “<</PageSize[516 729]/ImagingBBox null>>setpagedevice”
*PageRegion Executive/Executive: “<</PageSize[522 756]/ImagingBBox null>>setpagedevice”
*PageRegion A5/A5: “<</PageSize[420 595]/ImagingBBox null>>setpagedevice”
*PageRegion A6Cardstock/A6 Cardstock: “<</PageSize[298 420]/ImagingBBox null>>setpagedevice”
*PageRegion IndexCard3X5/Index Card 3x5: “<</PageSize[216 360]/ImagingBBox null>>setpagedevice”
*PageRegion Postcard4X6/Postcard 4x6: “<</PageSize[288 432]/ImagingBBox null>>setpagedevice”
*PageRegion Hagaki/Hagaki: “<</PageSize[283 420]/ImagingBBox null>>setpagedevice”
*PageRegion Envelope634/Envelope 6 3/4: “<</PageSize[261 468]/ImagingBBox null>>setpagedevice”
*PageRegion Envelope9/Envelope #9: “<</PageSize[279 639]/ImagingBBox null>>setpagedevice”
*PageRegion Envelope10/Envelope #10: “<</PageSize[297 684]/ImagingBBox null>>setpagedevice”
*PageRegion EnvelopeDL/Envelope DL: “<</PageSize[312 624]/ImagingBBox null>>setpagedevice”
*PageRegion EnvelopeC5/Envelope C5: “<</PageSize[459 649]/ImagingBBox null>>setpagedevice”
*PageRegion EnvelopeC6/Envelope C6: “<</PageSize[323 459]/ImagingBBox null>>setpagedevice”
*PageRegion EnvelopeB5/Envelope B5: “<</PageSize[499 708]/ImagingBBox null>>setpagedevice”
*PageRegion Envelope734/Envelope 7 3/4: “<</PageSize[279 540]/ImagingBBox null>>setpagedevice”
*PageRegion A2Baronial/A2 Baronial: “<</PageSize[315 414]/ImagingBBox null>>setpagedevice”
*PageRegion Chokei3/Chokei 3: “<</PageSize[340 666]/ImagingBBox null>>setpagedevice”
*PageRegion Chokei4/Chokei 4: “<</PageSize[255 581]/ImagingBBox null>>setpagedevice”
*PageRegion Chokei40/Chokei 40: “<</PageSize[255 638]/ImagingBBox null>>setpagedevice”
*PageRegion Kakugata3/Kakugata 3: “<</PageSize[612 785]/ImagingBBox null>>setpagedevice”
*PageRegion Kakugata4/Kakugata 4: “<</PageSize[558 757]/ImagingBBox null>>setpagedevice”
*PageRegion Kakugata5/Kakugata 5: “<</PageSize[539 680]/ImagingBBox null>>setpagedevice”
*PageRegion Kakugata6/Kakugata 6: “<</PageSize[459 649]/ImagingBBox null>>setpagedevice”
*PageRegion L/L: “<</PageSize[252 360]/ImagingBBox null>>setpagedevice”
*PageRegion 2L/2L: “<</PageSize[360 505]/ImagingBBox null>>setpagedevice”
*CloseUI: *PageRegion

*DefaultImageableArea: Letter
*ImageableArea Letter/Letter: “18 36 594 787”
*ImageableArea A4/A4: “18 36 585 837”
*ImageableArea Statement/Statement: “18 36 378 607”
*ImageableArea Legal/Legal: “18 36 594 1003”
*ImageableArea B5/B5: “18 36 506 724”
*ImageableArea Executive/Executive: “18 36 504 751”
*ImageableArea A5/A5: “18 36 410 590”
*ImageableArea A6Cardstock/A6 Cardstock: “18 36 280 415”
*ImageableArea IndexCard3X5/Index Card 3x5: “18 36 198 355”
*ImageableArea Postcard4X6/Postcard 4x6: “18 36 270 427”
*ImageableArea Hagaki/Hagaki: “18 36 265 415”
*ImageableArea Envelope634/Envelope 6 3/4: “18 36 256 463”
*ImageableArea Envelope9/Envelope #9: “18 36 274 634”
*ImageableArea Envelope10/Envelope #10: “18 36 292 679”
*ImageableArea EnvelopeDL/Envelope DL: “18 36 307 619”
*ImageableArea EnvelopeC5/Envelope C5: “18 36 454 644”
*ImageableArea EnvelopeC6/Envelope C6: “18 36 318 454”
*ImageableArea EnvelopeB5/Envelope B5: “18 36 494 703”
*ImageableArea Envelope734/Envelope 7 3/4: “18 36 274 535”
*ImageableArea A2Baronial/A2 Baronial: “18 36 310 409”
*ImageableArea Chokei3/Chokei 3: “18 36 335 661”
*ImageableArea Chokei4/Chokei 4: “18 36 250 576”
*ImageableArea Chokei40/Chokei 40: “18 36 250 678”
*ImageableArea Kakugata3/Kakugata 3: “18 36 607 780”
*ImageableArea Kakugata4/Kakugata 4: “18 36 553 752”
*ImageableArea Kakugata5/Kakugata 5: “18 36 534 675”
*ImageableArea Kakugata6/Kakugata 6: “18 36 454 644”
*ImageableArea L/L: “18 36 234 355”
*ImageableArea 2L/2L: “18 36 342 500”

*DefaultPaperDimension: Letter
*PaperDimension Letter/Letter: “612 792”
*PaperDimension A4/A4: “595 842”
*PaperDimension Statement/Statement: “396 612”
*PaperDimension Legal/Legal: “612 1008”
*PaperDimension B5/B5: “516 729”
*PaperDimension Executive/Executive: “522 756”
*PaperDimension A5/A5: “420 595”
*PaperDimension A6Cardstock/A6 Cardstock: “298 420”
*PaperDimension IndexCard3X5/Index Card 3x5: “216 360”
*PaperDimension Postcard4X6/Postcard 4x6: “288 432”
*PaperDimension Hagaki/Hagaki: “283 420”
*PaperDimension Envelope634/Envelope 6 3/4: “261 468”
*PaperDimension Envelope9/Envelope #9: “279 639”
*PaperDimension Envelope10/Envelope #10: “297 684”
*PaperDimension EnvelopeDL/Envelope DL: “312 624”
*PaperDimension EnvelopeC5/Envelope C5: “459 649”
*PaperDimension EnvelopeC6/Envelope C6: “323 459”
*PaperDimension EnvelopeB5/Envelope B5: “499 708”
*PaperDimension Envelope734/Envelope 7 3/4: “279 540”
*PaperDimension A2Baronial/A2 Baronial: “315 414”
*PaperDimension Chokei3/Chokei 3: “340 666”
*PaperDimension Chokei4/Chokei 4: “255 581”
*PaperDimension Chokei40/Chokei 40: “255 683”
*PaperDimension Kakugata3/Kakugata 3: “612 785”
*PaperDimension Kakugata4/Kakugata 4: “558 757”
*PaperDimension Kakugata5/Kakugata 5: “539 680”
*PaperDimension Kakugata6/Kakugata 6: “459 649”
*PaperDimension L/L: “252 360”
*PaperDimension 2L/2L: “360 505”

*MaxMediaWidth: “618”
*MaxMediaHeight: “936”
*HWMargins: 0 15 0 5
*CustomPageSize True: “pop pop pop <</PageSize[5 -2 roll]/ImagingBBox null>>setpagedevice”
*ParamCustomPageSize Width: 1 points 144 618
*ParamCustomPageSize Height: 2 points 288 936
*ParamCustomPageSize WidthOffset: 3 points 0 0
*ParamCustomPageSize HeightOffset: 4 points 0 0
*ParamCustomPageSize Orientation: 5 int 0 0

*OpenUI *MediaType/Media Type: PickOne
*OrderDependency: 10 AnySetup *MediaType
*DefaultMediaType: Plain
*MediaType Plain/Plain Paper: “<</cupsMediaType 0>>setpagedevice”
*MediaType Coated/Coated Paper: “<</cupsMediaType 1>>setpagedevice”
*MediaType Glossy/Glossy Paper: “<</cupsMediaType 2>>setpagedevice”
*MediaType Transparency/Transparency: “<</cupsMediaType 3>>setpagedevice”
*MediaType Greeting/Greeting Card: “<</cupsMediaType 4>>setpagedevice”
*MediaType IronOn/Iron-On Transfer: “<</cupsMediaType 5>>setpagedevice”
*%MediaType Automatic/Media Sense: “<</cupsMediaType 6>>setpagedevice”
*CloseUI: *MediaType

*OpenGroup: Others

*OpenUI *PrintQuality/Print Quality: PickOne
*OrderDependency: 20 AnySetup *PrintQuality
*DefaultPrintQuality: Normal
*PrintQuality Draft/Draft (300 dpi): “<</HWResolution[300 300]/cupsCompression 0>>setpagedevice”
*PrintQuality Normal/Normal (600 dpi): “<</HWResolution[600 600]/cupsCompression 1>>setpagedevice”
*PrintQuality Better/Better (1200 dpi): “<</HWResolution[600 600]/cupsCompression 2>>setpagedevice”
*PrintQuality Best/Best (2400 dpi): “<</HWResolution[600 600]/cupsCompression 3>>setpagedevice”
*CloseUI: *PrintQuality

*OpenUI *ColorModel/Output Mode: PickOne
*OrderDependency: 10 AnySetup *ColorModel
*DefaultColorModel: Color
*ColorModel Color/Color: “<</cupsColorOrder 0/cupsColorSpace 1/cupsBitsPerColor 8/cupsRowCount 0>>setpagedevice”
*ColorModel Black/Grayscale: “<</cupsColorOrder 0/cupsColorSpace 1/cupsBitsPerColor 8/cupsRowCount 1>>setpagedevice”
*CloseUI: *ColorModel

*OpenUI *Inkset/Inkset: PickOne
*OrderDependency: 10 AnySetup *Inkset
*DefaultInkset: CMYK
*Inkset CMY/CMY: “<</cupsRowStep 1>>setpagedevice”
*Inkset K/K: “<</cupsRowStep 2>>setpagedevice”
*Inkset CMYK/CMYK: “<</cupsRowStep 3>>setpagedevice”
*CloseUI: *Inkset

*CloseGroup: Others

*DefaultFont: Courier
*Font AvantGarde-Book: Standard “(001.006S)” Standard ROM
*Font AvantGarde-BookOblique: Standard “(001.006S)” Standard ROM
*Font AvantGarde-Demi: Standard “(001.007S)” Standard ROM
*Font AvantGarde-DemiOblique: Standard “(001.007S)” Standard ROM
*Font Bookman-Demi: Standard “(001.004S)” Standard ROM
*Font Bookman-DemiItalic: Standard “(001.004S)” Standard ROM
*Font Bookman-Light: Standard “(001.004S)” Standard ROM
*Font Bookman-LightItalic: Standard “(001.004S)” Standard ROM
*Font Courier: Standard “(002.004S)” Standard ROM
*Font Courier-Bold: Standard “(002.004S)” Standard ROM
*Font Courier-BoldOblique: Standard “(002.004S)” Standard ROM
*Font Courier-Oblique: Standard “(002.004S)” Standard ROM
*Font Helvetica: Standard “(001.006S)” Standard ROM
*Font Helvetica-Bold: Standard “(001.007S)” Standard ROM
*Font Helvetica-BoldOblique: Standard “(001.007S)” Standard ROM
*Font Helvetica-Narrow: Standard “(001.006S)” Standard ROM
*Font Helvetica-Narrow-Bold: Standard “(001.007S)” Standard ROM
*Font Helvetica-Narrow-BoldOblique: Standard “(001.007S)” Standard ROM
*Font Helvetica-Narrow-Oblique: Standard “(001.006S)” Standard ROM
*Font Helvetica-Oblique: Standard “(001.006S)” Standard ROM
*Font NewCenturySchlbk-Bold: Standard “(001.009S)” Standard ROM
*Font NewCenturySchlbk-BoldItalic: Standard “(001.007S)” Standard ROM
*Font NewCenturySchlbk-Italic: Standard “(001.006S)” Standard ROM
*Font NewCenturySchlbk-Roman: Standard “(001.007S)” Standard ROM
*Font Palatino-Bold: Standard “(001.005S)” Standard ROM
*Font Palatino-BoldItalic: Standard “(001.005S)” Standard ROM
*Font Palatino-Italic: Standard “(001.005S)” Standard ROM
*Font Palatino-Roman: Standard “(001.005S)” Standard ROM
*Font Symbol: Special “(001.007S)” Special ROM
*Font Times-Bold: Standard “(001.007S)” Standard ROM
*Font Times-BoldItalic: Standard “(001.009S)” Standard ROM
*Font Times-Italic: Standard “(001.007S)” Standard ROM
*Font Times-Roman: Standard “(001.007S)” Standard ROM
*Font ZapfChancery-MediumItalic: Standard “(001.007S)” Standard ROM
*Font ZapfDingbats: Special “(001.004S)” Standard ROM
root@localhost Roberto# [/code]