Fedora Online Forum

Il forum della comunità italiana di Fedora

#1 08-05-2019 09:35:43

ciccioduc
Appena sbarcato sul forum
Registrato: 16-04-2019
Messaggi: 14

[Risolto] Problema wi-fi scheda Broadcom BCM4313

Salve ho fatto, da qualche giorno, l'upgrade da Fedora 29 a 30.

Con la 29 la scheda per il wi-fi Broadcom BCM4313 funzionava perfettamente senza nessun problema ma dopo il passaggio alla 30 ha smesso di funzionare.
Per l'esattezza non sempre non si connette, a volte si il piu delle volte no.
Mi dice: Attivazione della connessione di rete non riuscita
Ho anche reinstallato kmod-wl

Potreste aiutarmi?
Grazie

Edit: spostato in sezione F30

Ultima modifica di tempus (10-05-2019 11:52:19)

Non in linea

#2 08-05-2019 14:44:12

JackDaniels
Appena sbarcato sul forum
Da Cosenza
Registrato: 04-03-2019
Messaggi: 87

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

https://wiki.archlinux.org/index.php/broadcom_wireless

Device works intermittently
In some cases (e.g. using BCM4331 and b43-firmwareAUR), wifi connection works intermittently. One way to fix this is to check if the card is hard-blocked or soft-blocked by kernel, and if it is, unblock it with rfkill.

Ultima modifica di JackDaniels (08-05-2019 14:46:47)


Se va male ricorda che poteva andare anche peggio!

Non in linea

#3 08-05-2019 15:36:53

ciccioduc
Appena sbarcato sul forum
Registrato: 16-04-2019
Messaggi: 14

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

I drive installati sembrano giusti

Non in linea

#4 08-05-2019 17:09:16

JackDaniels
Appena sbarcato sul forum
Da Cosenza
Registrato: 04-03-2019
Messaggi: 87

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

ciccioduc ha scritto:

I drive installati sembrano giusti

purtroppo ti devi applicare un po di piu e fare attenzione al wiki di archlinux
(non e' una questione di "driver alla windows" ci devi dedicare un po di tempo e di sforzi in particolar modo se sei nuovo)

Il problema va visto passo per passo quindi , come ti avevo evidenziato , parti da rfkill

sudo rfkill list 

poi

sudo systool -m ildriver -av 

cosi vediamo i vari parm del modulo che possono tornarci utili

inizia a escludere i vari problemi , magari puo essere anche una interferenza con il bluetooth.

P.S. devi iniziare a entrare nell'ottica abbandonando il mondo del "punta & clicca".
Non vuole essere una critica e io non sono un guru , cerco di aiutarti usando quel po di esperienza che ho e ti assicuro che il wiki di arch fa miracoli :-P

Ultima modifica di JackDaniels (08-05-2019 17:18:41)


Se va male ricorda che poteva andare anche peggio!

Non in linea

#5 08-05-2019 18:40:19

ciccioduc
Appena sbarcato sul forum
Registrato: 16-04-2019
Messaggi: 14

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

Allora Jack, intanto grazie per i consigli.

$ sudo rfkill list

0: hp-wifi: Wireless LAN
	Soft blocked: no
	Hard blocked: no
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

$ sudo systool -m wl -av

Module = "wl"

  Attributes:
    coresize            = "6463488"
    initsize            = "0"
    initstate           = "live"
    refcnt              = "0"
    taint               = "POE"
    uevent              = <store method only>

  Sections:
    .bss                = "0xffffffffc13033c0"
    .data               = "0xffffffffc11af000"
    .exit.text          = "0xffffffffc0e9a453"
    .gnu.linkonce.this_module= "0xffffffffc1303080"
    .init.text          = "0xffffffffc0c45000"
    .note.Linux         = "0xffffffffc0e9b024"
    .note.gnu.build-id  = "0xffffffffc0e9b000"
    .orc_unwind         = "0xffffffffc11ac374"
    .orc_unwind_ip      = "0xffffffffc11aad4c"
    .parainstructions   = "0xffffffffc11aee20"
    .ref.data           = "0xffffffffc1302f60"
    .rodata             = "0xffffffffc0e9b060"
    .rodata.str1.1      = "0xffffffffc11a5094"
    .rodata.str1.8      = "0xffffffffc11ae4b0"
    .smp_locks          = "0xffffffffc11aacbc"
    .strtab             = "0xffffffffc0c60838"
    .symtab             = "0xffffffffc0c46000"
    .text               = "0xffffffffc0d0f000"
    .text.unlikely      = "0xffffffffc0e98406"
    __bug_table         = "0xffffffffc1302ce4"
    __mcount_loc        = "0xffffffffc11aa6ca"
    __param             = "0xffffffffc11aed08"

Ultima modifica di ciccioduc (08-05-2019 18:45:34)

Non in linea

#6 09-05-2019 08:49:15

silvio
Fedora nel sangue
Da Mercato San Severino (Sa)
Registrato: 05-01-2007
Messaggi: 1'358

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

Vi seguo perchè ho lo stesso problema dopo l'aggiornamento fatto ieri sera.
Silvio


Qualcuno dice sempre che è impossibile fare qualcosa che qualcun altro sta facendo da qualche altra parte.

Non in linea

#7 09-05-2019 09:01:54

JackDaniels
Appena sbarcato sul forum
Da Cosenza
Registrato: 04-03-2019
Messaggi: 87

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

ciccioduc ha scritto:

Allora Jack, intanto grazie per i consigli.

$ sudo rfkill list

0: hp-wifi: Wireless LAN
	Soft blocked: no
	Hard blocked: no
1: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

$ sudo systool -m wl -av

Module = "wl"

  Attributes:
    coresize            = "6463488"
    initsize            = "0"
    initstate           = "live"
    refcnt              = "0"
    taint               = "POE"
    uevent              = <store method only>

  Sections:
    .bss                = "0xffffffffc13033c0"
    .data               = "0xffffffffc11af000"
    .exit.text          = "0xffffffffc0e9a453"
    .gnu.linkonce.this_module= "0xffffffffc1303080"
    .init.text          = "0xffffffffc0c45000"
    .note.Linux         = "0xffffffffc0e9b024"
    .note.gnu.build-id  = "0xffffffffc0e9b000"
    .orc_unwind         = "0xffffffffc11ac374"
    .orc_unwind_ip      = "0xffffffffc11aad4c"
    .parainstructions   = "0xffffffffc11aee20"
    .ref.data           = "0xffffffffc1302f60"
    .rodata             = "0xffffffffc0e9b060"
    .rodata.str1.1      = "0xffffffffc11a5094"
    .rodata.str1.8      = "0xffffffffc11ae4b0"
    .smp_locks          = "0xffffffffc11aacbc"
    .strtab             = "0xffffffffc0c60838"
    .symtab             = "0xffffffffc0c46000"
    .text               = "0xffffffffc0d0f000"
    .text.unlikely      = "0xffffffffc0e98406"
    __bug_table         = "0xffffffffc1302ce4"
    __mcount_loc        = "0xffffffffc11aa6ca"
    __param             = "0xffffffffc11aed08"

ho come l'impressione che wl non sia il modulo che stiamo cercando ergo:

 lsmod 

poi passiamo da dmesg

 dmesg 

Se va male ricorda che poteva andare anche peggio!

Non in linea

#8 09-05-2019 10:42:54

ciccioduc
Appena sbarcato sul forum
Registrato: 16-04-2019
Messaggi: 14

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

$  lsmod 
Module                  Size  Used by
fuse                  131072  3
xt_CHECKSUM            16384  1
ipt_MASQUERADE         20480  3
tun                    57344  1
bridge                200704  0
stp                    16384  1 bridge
llc                    16384  2 bridge,stp
devlink                77824  0
nf_conntrack_netbios_ns    16384  1
nf_conntrack_broadcast    16384  1 nf_conntrack_netbios_ns
xt_CT                  16384  1
ip6t_rpfilter          16384  1
ip6t_REJECT            16384  2
nf_reject_ipv6         20480  1 ip6t_REJECT
xt_conntrack           16384  24
ebtable_nat            16384  1
ip6table_nat           16384  1
nf_nat_ipv6            16384  1 ip6table_nat
ip6table_mangle        16384  1
ip6table_raw           16384  1
ip6table_security      16384  1
iptable_nat            16384  1
nf_nat_ipv4            16384  2 ipt_MASQUERADE,iptable_nat
nf_nat                 40960  2 nf_nat_ipv6,nf_nat_ipv4
iptable_mangle         16384  1
iptable_raw            16384  1
iptable_security       16384  1
nf_conntrack          155648  8 xt_conntrack,nf_nat,nf_nat_ipv6,ipt_MASQUERADE,nf_conntrack_netbios_ns,nf_nat_ipv4,nf_conntrack_broadcast,xt_CT
nf_defrag_ipv6         24576  1 nf_conntrack
nf_defrag_ipv4         16384  1 nf_conntrack
libcrc32c              16384  2 nf_conntrack,nf_nat
ip_set                 49152  0
nfnetlink              16384  1 ip_set
ebtable_filter         16384  1
ebtables               40960  2 ebtable_nat,ebtable_filter
ip6table_filter        16384  1
ip6_tables             32768  7 ip6table_filter,ip6table_raw,ip6table_nat,ip6table_mangle,ip6table_security
sunrpc                425984  1
squashfs               65536  9
zstd_decompress        86016  1 squashfs
loop                   36864  18
intel_powerclamp       20480  0
iTCO_wdt               16384  0
coretemp               20480  0
iTCO_vendor_support    16384  1 iTCO_wdt
uvcvideo              114688  0
kvm_intel             303104  0
videobuf2_vmalloc      20480  1 uvcvideo
videobuf2_memops       20480  1 videobuf2_vmalloc
snd_hda_codec_realtek   126976  1
snd_hda_codec_hdmi     61440  1
videobuf2_v4l2         28672  1 uvcvideo
snd_hda_codec_generic    90112  1 snd_hda_codec_realtek
ledtrig_audio          16384  2 snd_hda_codec_generic,snd_hda_codec_realtek
videobuf2_common       57344  2 videobuf2_v4l2,uvcvideo
intel_cstate           16384  0
snd_hda_intel          45056  6
intel_uncore          135168  0
wl                   6463488  0
videodev              233472  3 videobuf2_v4l2,uvcvideo,videobuf2_common
snd_hda_codec         155648  4 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_realtek
snd_hda_core           98304  5 snd_hda_codec_generic,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
media                  57344  4 videodev,videobuf2_v4l2,uvcvideo,videobuf2_common
cfg80211              794624  1 wl
hp_wmi                 16384  0
wmi_bmof               16384  0
sparse_keymap          16384  1 hp_wmi
snd_hwdep              16384  1 snd_hda_codec
joydev                 28672  0
snd_seq                86016  0
snd_seq_device         16384  1 snd_seq
snd_pcm               118784  4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hda_core
i2c_i801               32768  0
lpc_ich                28672  0
rfkill                 28672  7 hp_wmi,cfg80211
snd_timer              40960  2 snd_seq,snd_pcm
mei_me                 45056  0
snd                    94208  22 snd_hda_codec_generic,snd_seq,snd_seq_device,snd_hda_codec_hdmi,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
mei                   118784  1 mei_me
soundcore              16384  1 snd
pcc_cpufreq            20480  0
acpi_cpufreq           28672  1
i915                 2179072  16
radeon               1622016  1
kvmgt                  32768  0
mdev                   24576  1 kvmgt
vfio                   36864  1 kvmgt
kvm                   737280  2 kvmgt,kvm_intel
irqbypass              16384  1 kvm
i2c_algo_bit           16384  2 radeon,i915
drm_kms_helper        208896  2 radeon,i915
ttm                   114688  1 radeon
crc32c_intel           24576  3
drm                   495616  9 drm_kms_helper,radeon,i915,ttm
serio_raw              20480  0
r8169                  90112  0
wmi                    32768  2 hp_wmi,wmi_bmof
video                  49152  1 i915

Non in linea

#9 09-05-2019 10:45:32

ciccioduc
Appena sbarcato sul forum
Registrato: 16-04-2019
Messaggi: 14

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x7, date = 2018-04-23
[    0.000000] Linux version 5.0.11-300.fc30.x86_64 (mockbuild@bkernel04.phx2.fedoraproject.org) (gcc version 9.0.1 20190312 (Red Hat 9.0.1-0.10) (GCC)) #1 SMP Thu May 2 14:11:38 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=(hd0,msdos1)/boot/vmlinuz-5.0.11-300.fc30.x86_64 root=UUID=0702f2d9-8a4b-4f8b-962f-01236eaa2302 ro resume=UUID=ab67693d-1504-4223-8eaf-560068f440ba rhgb quiet
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009b63efff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b63f000-0x000000009b6befff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009b6bf000-0x000000009b7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009b7bf000-0x000000009b7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009b7ff000-0x000000009b7fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009b800000-0x000000009fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000157ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard HP G62 Notebook PC              /143A, BIOS F.32                  08/02/2010
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2260.825 MHz processor
[    0.002571] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002573] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.002583] last_pfn = 0x158000 max_arch_pfn = 0x400000000
[    0.002587] MTRR default type: uncachable
[    0.002588] MTRR fixed ranges enabled:
[    0.002590]   00000-9FFFF write-back
[    0.002590]   A0000-BFFFF uncachable
[    0.002591]   C0000-EFFFF write-through
[    0.002592]   F0000-FFFFF write-combining
[    0.002593] MTRR variable ranges enabled:
[    0.002594]   0 base 000000000 mask F80000000 write-back
[    0.002596]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.002597]   2 base 080000000 mask FE0000000 write-back
[    0.002598]   3 base 09C000000 mask FFC000000 uncachable
[    0.002598]   4 base 09B800000 mask FFF800000 uncachable
[    0.002599]   5 base 100000000 mask F80000000 write-back
[    0.002600]   6 base 158000000 mask FF8000000 uncachable
[    0.002601]   7 base 160000000 mask FE0000000 uncachable
[    0.003258] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.003384] last_pfn = 0x9b800 max_arch_pfn = 0x400000000
[    0.016784] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.016792] BRK [0x71e01000, 0x71e01fff] PGTABLE
[    0.016794] BRK [0x71e02000, 0x71e02fff] PGTABLE
[    0.016796] BRK [0x71e03000, 0x71e03fff] PGTABLE
[    0.016842] BRK [0x71e04000, 0x71e04fff] PGTABLE
[    0.016844] BRK [0x71e05000, 0x71e05fff] PGTABLE
[    0.016947] BRK [0x71e06000, 0x71e06fff] PGTABLE
[    0.017249] RAMDISK: [mem 0x34ec9000-0x3675cfff]
[    0.017259] ACPI: Early table checksum verification disabled
[    0.017759] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.017763] ACPI: XSDT 0x000000009B7FE120 00007C (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.017770] ACPI: FACP 0x000000009B7FC000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.017777] ACPI: DSDT 0x000000009B7ED000 00B2F6 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.017780] ACPI: FACS 0x000000009B75F000 000040
[    0.017783] ACPI: FACS 0x000000009B75F000 000040
[    0.017786] ACPI: ASF! 0x000000009B7FD000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.017790] ACPI: HPET 0x000000009B7FB000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.017793] ACPI: APIC 0x000000009B7FA000 00008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.017797] ACPI: MCFG 0x000000009B7F9000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.017801] ACPI: SLIC 0x000000009B7EC000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.017804] ACPI: BOOT 0x000000009B7E8000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.017808] ACPI: ASPT 0x000000009B7E5000 000034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.017811] ACPI: WDAT 0x000000009B7E4000 000224 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.017815] ACPI: SSDT 0x000000009B7E3000 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.017819] ACPI: SSDT 0x000000009B7E1000 001ACA (v01 AmdRef AmdTabl  00001000 INTL 20051117)
[    0.017831] ACPI: Local APIC address 0xfee00000
[    0.017974] No NUMA configuration found
[    0.017975] Faking a node at [mem 0x0000000000000000-0x0000000157ffffff]
[    0.017987] NODE_DATA(0) allocated [mem 0x157fd2000-0x157ffcfff]
[    0.030762] Zone ranges:
[    0.030765]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.030767]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.030768]   Normal   [mem 0x0000000100000000-0x0000000157ffffff]
[    0.030769]   Device   empty
[    0.030770] Movable zone start for each node
[    0.030773] Early memory node ranges
[    0.030774]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.030775]   node   0: [mem 0x0000000000100000-0x000000009b63efff]
[    0.030776]   node   0: [mem 0x000000009b7ff000-0x000000009b7fffff]
[    0.030777]   node   0: [mem 0x0000000100000000-0x0000000157ffffff]
[    0.031171] Zeroed struct page in unavailable ranges: 18980 pages
[    0.031173] Initmem setup node 0 [mem 0x0000000000001000-0x0000000157ffffff]
[    0.031175] On node 0 totalpages: 996828
[    0.031176]   DMA zone: 64 pages used for memmap
[    0.031177]   DMA zone: 21 pages reserved
[    0.031178]   DMA zone: 3996 pages, LIFO batch:0
[    0.031319]   DMA32 zone: 9881 pages used for memmap
[    0.031320]   DMA32 zone: 632384 pages, LIFO batch:63
[    0.056272]   Normal zone: 5632 pages used for memmap
[    0.056275]   Normal zone: 360448 pages, LIFO batch:63
[    0.068421] Reserving Intel graphics memory at [mem 0x9e000000-0x9fffffff]
[    0.068617] ACPI: PM-Timer IO Port: 0x408
[    0.068619] ACPI: Local APIC address 0xfee00000
[    0.068642] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.068645] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.068647] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.068649] ACPI: IRQ0 used by override.
[    0.068650] ACPI: IRQ9 used by override.
[    0.068652] Using ACPI (MADT) for SMP configuration information
[    0.068654] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.068662] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.068684] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.068686] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.068686] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.068687] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.068689] PM: Registered nosave memory: [mem 0x9b63f000-0x9b6befff]
[    0.068689] PM: Registered nosave memory: [mem 0x9b6bf000-0x9b7befff]
[    0.068690] PM: Registered nosave memory: [mem 0x9b7bf000-0x9b7fefff]
[    0.068692] PM: Registered nosave memory: [mem 0x9b800000-0x9fffffff]
[    0.068692] PM: Registered nosave memory: [mem 0xa0000000-0xefffffff]
[    0.068693] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.068693] PM: Registered nosave memory: [mem 0xf8000000-0xfeafffff]
[    0.068694] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.068695] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.068695] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.068696] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.068697] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.068697] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.068698] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.068698] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[    0.068699] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[    0.068700] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.068700] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.068701] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.068702] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.068704] [mem 0xa0000000-0xefffffff] available for PCI devices
[    0.068705] Booting paravirtualized kernel on bare hardware
[    0.068709] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.364860] random: get_random_bytes called from start_kernel+0x91/0x519 with crng_init=0
[    0.364873] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.365316] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144
[    0.365325] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.365326] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.365359] Built 1 zonelists, mobility grouping on.  Total pages: 981230
[    0.365360] Policy zone: Normal
[    0.365363] Kernel command line: BOOT_IMAGE=(hd0,msdos1)/boot/vmlinuz-5.0.11-300.fc30.x86_64 root=UUID=0702f2d9-8a4b-4f8b-962f-01236eaa2302 ro resume=UUID=ab67693d-1504-4223-8eaf-560068f440ba rhgb quiet
[    0.392967] Memory: 3799992K/3987312K available (12291K kernel code, 1524K rwdata, 4024K rodata, 2204K init, 4688K bss, 187320K reserved, 0K cma-reserved)
[    0.393154] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.393162] Kernel/User page tables isolation: enabled
[    0.393185] ftrace: allocating 39069 entries in 153 pages
[    0.417461] rcu: Hierarchical RCU implementation.
[    0.417464] rcu: 	RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=8.
[    0.417465] 	Tasks RCU enabled.
[    0.417466] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.417467] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.421356] NR_IRQS: 65792, nr_irqs: 488, preallocated irqs: 16
[    0.424169] Console: colour VGA+ 80x25
[    0.424174] printk: console [tty0] enabled
[    0.424194] ACPI: Core revision 20181213
[    0.424433] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.424447] hpet clockevent registered
[    0.424454] APIC: Switch to symmetric I/O mode setup
[    0.425041] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.429453] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2096a5e83a2, max_idle_ns: 440795223772 ns
[    0.429469] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.65 BogoMIPS (lpj=2260825)
[    0.429472] pid_max: default: 32768 minimum: 301
[    0.429507] LSM: Security Framework initializing
[    0.429508] Yama: becoming mindful.
[    0.429513] SELinux:  Initializing.
[    0.430542] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.431045] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.431077] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.431100] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.431407] mce: CPU supports 9 MCE banks
[    0.431424] process: using mwait in idle threads
[    0.431428] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.431429] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.431431] Spectre V2 : Mitigation: Full generic retpoline
[    0.431432] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.431432] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.431461] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.431461] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.431464] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.431648] Freeing SMP alternatives memory: 36K
[    0.434455] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       M 350  @ 2.27GHz (family: 0x6, model: 0x25, stepping: 0x5)
[    0.434455] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[    0.434455] core: CPUID marked event: 'bus cycles' unavailable
[    0.434455] ... version:                3
[    0.434455] ... bit width:              48
[    0.434455] ... generic registers:      4
[    0.434455] ... value mask:             0000ffffffffffff
[    0.434455] ... max period:             000000007fffffff
[    0.434455] ... fixed-purpose events:   3
[    0.434455] ... event mask:             000000070000000f
[    0.434455] rcu: Hierarchical SRCU implementation.
[    0.434933] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.435035] smp: Bringing up secondary CPUs ...
[    0.435151] x86: Booting SMP configuration:
[    0.435152] .... node  #0, CPUs:      #1 #2 #3
[    0.439538] smp: Brought up 1 node, 4 CPUs
[    0.439538] smpboot: Max logical packages: 2
[    0.439538] smpboot: Total of 4 processors activated (18086.60 BogoMIPS)
[    0.441543] devtmpfs: initialized
[    0.441543] x86/mm: Memory block size: 128MB
[    0.441964] PM: Registering ACPI NVS region [mem 0x9b6bf000-0x9b7befff] (1048576 bytes)
[    0.441964] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.441964] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.442523] pinctrl core: initialized pinctrl subsystem
[    0.442651] RTC time: 11:29:48, date: 2019-05-09
[    0.442805] NET: Registered protocol family 16
[    0.442916] audit: initializing netlink subsys (disabled)
[    0.442924] audit: type=2000 audit(1557401388.018:1): state=initialized audit_enabled=0 res=1
[    0.442924] cpuidle: using governor menu
[    0.442924] Simple Boot Flag at 0x44 set to 0x1
[    0.442924] ACPI: bus type PCI registered
[    0.442924] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.442924] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.442924] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.442924] PCI: Using configuration type 1 for base access
[    0.444877] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.444877] cryptd: max_cpu_qlen set to 1000
[    0.444877] ACPI: Added _OSI(Module Device)
[    0.444877] ACPI: Added _OSI(Processor Device)
[    0.444877] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.444877] ACPI: Added _OSI(Processor Aggregator Device)
[    0.444877] ACPI: Added _OSI(Linux-Dell-Video)
[    0.444877] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.444877] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.456442] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.458105] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.458643] ACPI: Dynamic OEM Table Load:
[    0.458649] ACPI: SSDT 0xFFFF8FE292FB5800 0003F0 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.459125] ACPI: Dynamic OEM Table Load:
[    0.459132] ACPI: SSDT 0xFFFF8FE293859000 000891 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.459868] ACPI: Dynamic OEM Table Load:
[    0.459873] ACPI: SSDT 0xFFFF8FE292FB7C00 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.460202] ACPI: Dynamic OEM Table Load:
[    0.460207] ACPI: SSDT 0xFFFF8FE292FBD200 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.461102] ACPI: EC: EC started
[    0.461103] ACPI: EC: interrupt blocked
[    1.303172] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    1.303175] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.303176] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    1.303177] ACPI: Interpreter enabled
[    1.303218] ACPI: (supports S0 S3 S4 S5)
[    1.303219] ACPI: Using IOAPIC for interrupt routing
[    1.303262] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.303475] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    1.303516] ACPI: Enabled 10 GPEs in block 00 to 3F
[    1.311245] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    1.311250] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.311289] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    1.311823] PCI host bridge to bus 0000:00
[    1.311826] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.311827] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.311829] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.311830] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
[    1.311832] pci_bus 0000:00: root bus resource [bus 00-7e]
[    1.311840] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    1.311865] DMAR: Disabling batched IOTLB flush on Ironlake
[    1.311942] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[    1.311983] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.312062] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    1.312074] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
[    1.312079] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    1.312084] pci 0000:00:02.0: reg 0x20: [io  0x4050-0x4057]
[    1.312226] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    1.312258] pci 0000:00:16.0: reg 0x10: [mem 0xc4504000-0xc450400f 64bit]
[    1.312352] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.312449] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    1.312482] pci 0000:00:1a.0: reg 0x10: [mem 0xc450a000-0xc450a3ff]
[    1.312586] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.312683] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    1.312715] pci 0000:00:1b.0: reg 0x10: [mem 0xc4500000-0xc4503fff 64bit]
[    1.312827] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.312922] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    1.313039] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.313142] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    1.313258] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.313369] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    1.313397] pci 0000:00:1d.0: reg 0x10: [mem 0xc4509000-0xc45093ff]
[    1.313506] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.313597] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    1.313751] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[    1.313938] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[    1.313966] pci 0000:00:1f.2: reg 0x10: [io  0x4048-0x404f]
[    1.313977] pci 0000:00:1f.2: reg 0x14: [io  0x405c-0x405f]
[    1.313987] pci 0000:00:1f.2: reg 0x18: [io  0x4040-0x4047]
[    1.313998] pci 0000:00:1f.2: reg 0x1c: [io  0x4058-0x405b]
[    1.314009] pci 0000:00:1f.2: reg 0x20: [io  0x4020-0x403f]
[    1.314019] pci 0000:00:1f.2: reg 0x24: [mem 0xc4508000-0xc45087ff]
[    1.314080] pci 0000:00:1f.2: PME# supported from D3hot
[    1.314164] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    1.314192] pci 0000:00:1f.3: reg 0x10: [mem 0xc4506000-0xc45060ff 64bit]
[    1.314221] pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
[    1.314376] pci 0000:01:00.0: [1002:68e0] type 00 class 0x030000
[    1.314400] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
[    1.314412] pci 0000:01:00.0: reg 0x18: [mem 0xc4400000-0xc441ffff 64bit]
[    1.314420] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    1.314433] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.314441] pci 0000:01:00.0: enabling Extended Tags
[    1.314493] pci 0000:01:00.0: supports D1 D2
[    1.314508] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)
[    1.314589] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[    1.314616] pci 0000:01:00.1: reg 0x10: [mem 0xc4420000-0xc4423fff 64bit]
[    1.314656] pci 0000:01:00.1: enabling Extended Tags
[    1.314702] pci 0000:01:00.1: supports D1 D2
[    1.314782] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.314784] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    1.314786] pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
[    1.314789] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.314918] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[    1.315025] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    1.315139] pci 0000:02:00.0: reg 0x18: [mem 0xc0410000-0xc0410fff 64bit pref]
[    1.315209] pci 0000:02:00.0: reg 0x20: [mem 0xc0400000-0xc040ffff 64bit pref]
[    1.315250] pci 0000:02:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    1.315614] pci 0000:02:00.0: supports D1 D2
[    1.315616] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.315977] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.315982] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.315986] pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
[    1.315993] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.316116] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
[    1.316188] pci 0000:03:00.0: reg 0x10: [mem 0xc2400000-0xc2403fff 64bit]
[    1.316305] pci 0000:03:00.0: enabling Extended Tags
[    1.316479] pci 0000:03:00.0: supports D1 D2
[    1.316684] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.316689] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    1.316693] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff]
[    1.316700] pci 0000:00:1c.2:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.316725] pci_bus 0000:04: extended config space not accessible
[    1.316782] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    1.316794] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    1.316795] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    1.316797] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    1.316798] pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfeafffff window] (subtractive decode)
[    1.317325] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    1.317381] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.317435] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.317496] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.317549] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.317607] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.317661] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    1.317715] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[    1.332750] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 7f])
[    1.332753] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.332836] PCI host bridge to bus 0000:7f
[    1.332838] pci_bus 0000:7f: root bus resource [bus 7f]
[    1.332843] pci 0000:7f:00.0: [8086:2c62] type 00 class 0x060000
[    1.332893] pci 0000:7f:00.1: [8086:2d01] type 00 class 0x060000
[    1.332945] pci 0000:7f:02.0: [8086:2d10] type 00 class 0x060000
[    1.332991] pci 0000:7f:02.1: [8086:2d11] type 00 class 0x060000
[    1.333035] pci 0000:7f:02.2: [8086:2d12] type 00 class 0x060000
[    1.333079] pci 0000:7f:02.3: [8086:2d13] type 00 class 0x060000
[    1.333191] ACPI: EC: interrupt unblocked
[    1.333191] ACPI: EC: event unblocked
[    1.333191] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    1.333191] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    1.333464] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.333466] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.333471] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.333474] pci 0000:00:02.0: vgaarb: no bridge control possible
[    1.333475] pci 0000:01:00.0: vgaarb: bridge control possible
[    1.333476] vgaarb: loaded
[    1.333557] SCSI subsystem initialized
[    1.333557] libata version 3.00 loaded.
[    1.333557] ACPI: bus type USB registered
[    1.333557] usbcore: registered new interface driver usbfs
[    1.333557] usbcore: registered new interface driver hub
[    1.333557] usbcore: registered new device driver usb
[    1.333577] pps_core: LinuxPPS API ver. 1 registered
[    1.333578] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.333580] PTP clock support registered
[    1.333604] EDAC MC: Ver: 3.0.0
[    1.333604] PCI: Using ACPI for IRQ routing
[    1.338971] PCI: pci_cache_line_size set to 64 bytes
[    1.339060] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    1.339062] e820: reserve RAM buffer [mem 0x9b63f000-0x9bffffff]
[    1.339063] e820: reserve RAM buffer [mem 0x9b800000-0x9bffffff]
[    1.339189] NetLabel: Initializing
[    1.339189] NetLabel:  domain hash size = 128
[    1.339190] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.339209] NetLabel:  unlabeled traffic allowed by default
[    1.339213] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.339213] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.340479] clocksource: Switched to clocksource tsc-early
[    1.358508] VFS: Disk quotas dquot_6.6.0
[    1.358534] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.358615] pnp: PnP ACPI init
[    1.358857] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io  0x1000-0x1fff]
[    1.358918] system 00:00: [io  0x0680-0x069f] has been reserved
[    1.358920] system 00:00: [io  0x0800-0x080f] has been reserved
[    1.358921] system 00:00: [io  0x0810-0x0813] has been reserved
[    1.358923] system 00:00: [io  0xffff] has been reserved
[    1.358925] system 00:00: [io  0x0400-0x047f] has been reserved
[    1.358926] system 00:00: [io  0x0500-0x057f] has been reserved
[    1.358933] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.358961] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.358988] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.359010] pnp 00:03: Plug and Play ACPI device, IDs SYN1e25 SYN1e00 SYN0002 PNP0f13 (active)
[    1.359301] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.359303] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.359304] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.359306] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.359307] system 00:04: [mem 0xf0000000-0xf1ffffff] has been reserved
[    1.359309] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.359310] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.359312] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[    1.359314] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.359315] system 00:04: [mem 0xc4600000-0xc4600fff] has been reserved
[    1.359320] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.373898] pnp: PnP ACPI: found 5 devices
[    1.379955] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.379996] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    1.379998] pci 0000:02:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    1.380037] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref]
[    1.380040] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.380042] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    1.380045] pci 0000:00:01.0:   bridge window [mem 0xc4400000-0xc44fffff]
[    1.380047] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    1.380051] pci 0000:02:00.0: BAR 6: assigned [mem 0xc3400000-0xc341ffff pref]
[    1.380053] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.380056] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.380061] pci 0000:00:1c.0:   bridge window [mem 0xc3400000-0xc43fffff]
[    1.380065] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.380073] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.380075] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    1.380081] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff]
[    1.380086] pci 0000:00:1c.2:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.380094] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    1.380108] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.380110] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.380111] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.380112] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
[    1.380114] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.380115] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff]
[    1.380116] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    1.380118] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.380119] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff]
[    1.380120] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
[    1.380122] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    1.380123] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff]
[    1.380124] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
[    1.380126] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    1.380127] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    1.380128] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.380130] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff window]
[    1.380228] NET: Registered protocol family 2
[    1.380458] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    1.380483] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    1.380567] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.380683] TCP: Hash tables configured (established 32768 bind 32768)
[    1.380736] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.380754] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.380875] NET: Registered protocol family 1
[    1.380882] NET: Registered protocol family 44
[    1.380912] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.381617] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    1.381673] PCI: CLS 64 bytes, default 64
[    1.381784] Unpacking initramfs...
[    1.862841] Freeing initrd memory: 25168K
[    1.862874] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.862876] software IO TLB: mapped [mem 0x9763f000-0x9b63f000] (64MB)
[    1.865654] Initialise system trusted keyrings
[    1.865667] Key type blacklist registered
[    1.865712] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.867316] zbud: loaded
[    1.868143] Platform Keyring initialized
[    2.118228] alg: No test for 842 (842-generic)
[    2.119358] alg: No test for 842 (842-scomp)
[    2.154766] NET: Registered protocol family 38
[    2.154770] Key type asymmetric registered
[    2.154771] Asymmetric key parser 'x509' registered
[    2.154797] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    2.154847] io scheduler mq-deadline registered
[    2.154848] io scheduler kyber registered
[    2.154925] io scheduler bfq registered
[    2.155005] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    2.155704] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.155726] intel_idle: MWAIT substates: 0x1120
[    2.155727] intel_idle: v0.4.1 model 0x25
[    2.155964] intel_idle: lapic_timer_reliable_states 0xffffffff
[    2.157426] ACPI: AC Adapter [ADP1] (on-line)
[    2.157545] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.157553] ACPI: Lid Switch [LID0]
[    2.157587] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.157594] ACPI: Power Button [PWRB]
[    2.157627] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.157705] ACPI: Power Button [PWRF]
[    2.176859] thermal LNXTHERM:00: registered as thermal_zone0
[    2.176862] ACPI: Thermal Zone [TSZ0] (0 C)
[    2.177227] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.185445] Non-volatile memory driver v1.3
[    2.185491] Linux agpgart interface v0.103
[    2.186345] ahci 0000:00:1f.2: version 3.0
[    2.186580] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    2.186583] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst 
[    2.190095] scsi host0: ahci
[    2.190562] scsi host1: ahci
[    2.191070] scsi host2: ahci
[    2.191424] scsi host3: ahci
[    2.191549] ata1: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508100 irq 24
[    2.191551] ata2: SATA max UDMA/133 abar m2048@0xc4508000 port 0xc4508180 irq 24
[    2.191552] ata3: DUMMY
[    2.191553] ata4: DUMMY
[    2.191676] battery: ACPI: Battery Slot [BAT0] (battery absent)
[    2.191685] libphy: Fixed MDIO Bus: probed
[    2.191820] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.191828] ehci-pci: EHCI PCI platform driver
[    2.192044] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.192104] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.192127] ehci-pci 0000:00:1a.0: debug port 2
[    2.196078] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    2.196094] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc450a000
[    2.202567] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.202649] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    2.202653] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.202655] usb usb1: Product: EHCI Host Controller
[    2.202657] usb usb1: Manufacturer: Linux 5.0.11-300.fc30.x86_64 ehci_hcd
[    2.202659] usb usb1: SerialNumber: 0000:00:1a.0
[    2.202835] hub 1-0:1.0: USB hub found
[    2.202846] hub 1-0:1.0: 3 ports detected
[    2.203131] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    2.203190] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.203205] ehci-pci 0000:00:1d.0: debug port 2
[    2.207136] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    2.207173] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc4509000
[    2.213595] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.213722] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    2.213724] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.213725] usb usb2: Product: EHCI Host Controller
[    2.213726] usb usb2: Manufacturer: Linux 5.0.11-300.fc30.x86_64 ehci_hcd
[    2.213728] usb usb2: SerialNumber: 0000:00:1d.0
[    2.213891] hub 2-0:1.0: USB hub found
[    2.213901] hub 2-0:1.0: 3 ports detected
[    2.214061] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.214065] ohci-pci: OHCI PCI platform driver
[    2.214076] uhci_hcd: USB Universal Host Controller Interface driver
[    2.214126] usbcore: registered new interface driver usbserial_generic
[    2.214131] usbserial: USB Serial support registered for generic
[    2.214171] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.221117] i8042: Detected active multiplexing controller, rev 1.1
[    2.223641] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.223647] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.223678] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.223700] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.223721] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.223835] mousedev: PS/2 mouse device common for all mice
[    2.224219] rtc_cmos 00:01: RTC can wake from S4
[    2.224583] rtc_cmos 00:01: registered as rtc0
[    2.224588] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    2.224814] device-mapper: uevent: version 1.0.3
[    2.224975] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    2.225393] hidraw: raw HID events driver (C) Jiri Kosina
[    2.225483] usbcore: registered new interface driver usbhid
[    2.225484] usbhid: USB HID core driver
[    2.225680] drop_monitor: Initializing network drop monitor service
[    2.225961] Initializing XFRM netlink socket
[    2.226257] NET: Registered protocol family 10
[    2.232021] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    2.232906] Segment Routing with IPv6
[    2.232938] mip6: Mobile IPv6
[    2.232942] NET: Registered protocol family 17
[    2.233387] RAS: Correctable Errors collector initialized.
[    2.233424] microcode: sig=0x20655, pf=0x10, revision=0x7
[    2.233480] microcode: Microcode Update Driver: v2.2.
[    2.233501] sched_clock: Marking stable (2230685979, 2788049)->(2375406527, -141932499)
[    2.233947] registered taskstats version 1
[    2.233964] Loading compiled-in X.509 certificates
[    2.336303] Loaded X.509 cert 'Fedora kernel signing key: 5220b06bfbd7eaf2f0f5b07ae858adaf2e5850c1'
[    2.336352] zswap: loaded using pool lzo/zbud
[    2.340089] Key type big_key registered
[    2.343638] Key type encrypted registered
[    2.343650] ima: No TPM chip found, activating TPM-bypass!
[    2.343656] ima: Allocated hash algorithm: sha1
[    2.343666] No architecture policies found
[    2.344126]   Magic number: 3:760:478
[    2.344135] rtc rtc0: hash matches
[    2.344300] rtc_cmos 00:01: setting system clock to 2019-05-09T11:29:50 UTC (1557401390)
[    2.502442] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.502485] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.502797] ata1.00: ATA-10: KINGSTON SA400S37240G, SBFKB1D2, max UDMA/133
[    2.502800] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.503113] ata1.00: configured for UDMA/133
[    2.513747] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SA400S3 B1D2 PQ: 0 ANSI: 5
[    2.514035] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.514137] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    2.514170] sd 0:0:0:0: [sda] Write Protect is off
[    2.514173] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.514216] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.515214]  sda: sda1 sda2 sda3 sda4
[    2.516645] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.521567] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.521812] ata2.00: ATAPI: hp       CDDVDW TS-L633N, 0300, max UDMA/100
[    2.537542] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.541859] ata2.00: configured for UDMA/100
[    2.558665] scsi 1:0:0:0: CD-ROM            hp       CDDVDW TS-L633N  0300 PQ: 0 ANSI: 5
[    2.604221] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.604223] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.604731] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.604845] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.650322] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    2.650327] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.650986] hub 1-1:1.0: USB hub found
[    2.651163] hub 1-1:1.0: 6 ports detected
[    2.666122] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    2.666125] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.666537] hub 2-1:1.0: USB hub found
[    2.666750] hub 2-1:1.0: 8 ports detected
[    2.887563] tsc: Refined TSC clocksource calibration: 2260.999 MHz
[    2.887574] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20974a4d8bb, max_idle_ns: 440795246623 ns
[    2.887633] clocksource: Switched to clocksource tsc
[    2.927542] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    3.021297] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b1aa, bcdDevice=59.53
[    3.021300] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.021302] usb 1-1.3: Product: HP Webcam-101
[    3.021304] usb 1-1.3: Manufacturer: Chicony Corp.
[    3.548093] random: fast init done
[    3.700227] psmouse serio2: synaptics: queried max coordinates: x [..5888], y [..4844]
[    3.769730] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0xa0400/0x0, board id: 0, fw id: 639099
[    3.814082] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[    4.367914] Freeing unused decrypted memory: 2040K
[    4.368932] Freeing unused kernel image memory: 2204K
[    4.374525] Write protecting the kernel read-only data: 18432k
[    4.375933] Freeing unused kernel image memory: 2020K
[    4.376204] Freeing unused kernel image memory: 72K
[    4.409558] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.409569] rodata_test: all tests were successful
[    4.409571] x86/mm: Checking user space page tables
[    4.442549] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    4.442555] Run /init as init process
[    4.470905] systemd[1]: systemd v241-8.git9ef65cb.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    4.482675] systemd[1]: Detected architecture x86-64.
[    4.482680] systemd[1]: Running in initial RAM disk.
[    4.487725] systemd[1]: Set hostname to <localhost.localdomain>.
[    4.594440] random: systemd: uninitialized urandom read (16 bytes read)
[    4.594490] systemd[1]: Reached target Local File Systems.
[    4.594624] random: systemd: uninitialized urandom read (16 bytes read)
[    4.594647] systemd[1]: Reached target Timers.
[    4.594687] random: systemd: uninitialized urandom read (16 bytes read)
[    4.594846] systemd[1]: Listening on udev Kernel Socket.
[    4.595132] systemd[1]: Listening on Journal Socket.
[    4.595384] systemd[1]: Listening on udev Control Socket.
[    4.595695] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    4.961973] audit: type=1130 audit(1557401393.116:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    4.984919] audit: type=1130 audit(1557401393.139:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.299451] audit: type=1130 audit(1557401393.453:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.479892] audit: type=1130 audit(1557401393.632:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.500566] audit: type=1130 audit(1557401393.653:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    5.512742] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[    5.523288] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    5.527329] libphy: r8169: probed
[    5.527624] r8169 0000:02:00.0 eth0: RTL8102e, 90:fb:a6:a8:f2:88, XID 24e, IRQ 25
[    5.653352] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    5.727248] VFIO - User Level meta-driver version: 0.3
[    5.845946] [drm] radeon kernel modesetting enabled.
[    5.845985] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
[    5.846068] ATPX version 1, functions 0x000000bf
[    5.846272] radeon 0000:01:00.0: enabling device (0000 -> 0003)
[    5.846778] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0 0x103C:0x143A 0x00).
[    5.938167] pci 0000:00:00.0: Intel HD Graphics Chipset
[    5.938195] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    5.938725] pci 0000:00:00.0: detected 32768K stolen memory
[    5.938800] [drm] Replacing VGA console driver
[    5.939303] Console: switching to colour dummy device 80x25
[    5.976505] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.976507] [drm] Driver supports precise vblank timestamp query.
[    5.997866] vga_switcheroo: enabled
[    6.011665] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    6.011671] radeon 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[    6.011969] ATOM BIOS: HP
[    6.012054] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    6.012056] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    6.012063] [drm] Detected VRAM RAM=1024M, BAR=256M
[    6.012064] [drm] RAM width 64bits DDR
[    6.012134] [TTM] Zone  kernel: Available graphics memory: 1915766 kiB
[    6.012135] [TTM] Initializing pool allocator
[    6.012140] [TTM] Initializing DMA pool allocator
[    6.012163] [drm] radeon: 1024M of VRAM memory ready
[    6.012164] [drm] radeon: 1024M of GTT memory ready.
[    6.012175] [drm] Loading CEDAR Microcode
[    6.012300] [drm] Internal thermal controller with fan control
[    6.016823] [drm] radeon: dpm initialized
[    6.016916] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    6.023817] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[    6.023959] radeon 0000:01:00.0: WB enabled
[    6.023963] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(____ptrval____)
[    6.023964] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(____ptrval____)
[    6.024349] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x(____ptrval____)
[    6.024351] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.024352] [drm] Driver supports precise vblank timestamp query.
[    6.024353] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    6.024423] radeon 0000:01:00.0: radeon: using MSI.
[    6.024454] [drm] radeon: irq initialized.
[    6.038039] [drm] RC6 disabled, disabling runtime PM support
[    6.041406] [drm] ring test on 0 succeeded in 1 usecs
[    6.041413] [drm] ring test on 3 succeeded in 2 usecs
[    6.219071] [drm] ring test on 5 succeeded in 1 usecs
[    6.219077] [drm] UVD initialized successfully.
[    6.219389] [drm] ib test on ring 0 succeeded in 0 usecs
[    6.219501] [drm] ib test on ring 3 succeeded in 0 usecs
[    6.371117] [drm] ib test on ring 5 succeeded
[    6.428629] [drm] radeon atom DIG backlight initialized
[    6.428632] [drm] Radeon Display Connectors
[    6.428633] [drm] Connector 0:
[    6.428634] [drm]   LVDS-2
[    6.428636] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[    6.428637] [drm]   Encoders:
[    6.428639] [drm]     LCD1: INTERNAL_UNIPHY
[    6.428640] [drm] Connector 1:
[    6.428641] [drm]   HDMI-A-1
[    6.428642] [drm]   HPD1
[    6.428644] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    6.428644] [drm]   Encoders:
[    6.428645] [drm]     DFP1: INTERNAL_UNIPHY1
[    6.428646] [drm] Connector 2:
[    6.428647] [drm]   VGA-2
[    6.428649] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    6.428650] [drm]   Encoders:
[    6.428651] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.463953] [drm] Cannot find any crtc or sizes
[    6.495672] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    6.496202] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 1
[    6.499048] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.499834] acpi device:01: registered as cooling_device4
[    6.499970] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[    6.500096] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    6.502232] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
[    6.502812] acpi device:0a: registered as cooling_device5
[    6.502867] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:01/input/input15
[    6.502952] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[    6.513834] fbcon: inteldrmfb (fb0) is primary device
[    7.288645] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[    7.288900] [drm:ironlake_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[    7.305106] Console: switching to colour frame buffer device 170x48
[    7.324714] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.468721] audit: type=1130 audit(1557401395.623:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.508905] [drm] Cannot find any crtc or sizes
[    7.518321] audit: type=1130 audit(1557401395.672:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.536009] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    7.838843] audit: type=1130 audit(1557401395.993:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.838855] audit: type=1131 audit(1557401395.993:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.029586] audit: type=1130 audit(1557401396.184:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.044995] audit: type=1131 audit(1557401396.199:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.051742] audit: type=1131 audit(1557401396.206:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.055202] audit: type=1131 audit(1557401396.209:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.266851] systemd-journald[225]: Received SIGTERM from PID 1 (systemd).
[    8.310035] printk: systemd: 22 output lines suppressed due to ratelimiting
[    9.006619] SELinux:  policy capability network_peer_controls=1
[    9.006620] SELinux:  policy capability open_perms=1
[    9.006621] SELinux:  policy capability extended_socket_class=1
[    9.006621] SELinux:  policy capability always_check_network=0
[    9.006622] SELinux:  policy capability cgroup_seclabel=1
[    9.006623] SELinux:  policy capability nnp_nosuid_transition=1
[    9.035006] systemd[1]: Successfully loaded SELinux policy in 539.330ms.
[    9.062185] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[    9.115434] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 43.498ms.
[    9.121692] systemd[1]: systemd v241-8.git9ef65cb.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    9.133694] systemd[1]: Detected architecture x86-64.
[    9.135005] systemd[1]: Set hostname to <localhost.localdomain>.
[    9.381053] systemd[1]: /usr/lib/systemd/system/gssproxy.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/gssproxy.pid → /run/gssproxy.pid; please update the unit file accordingly.
[    9.385373] systemd[1]: /usr/lib/systemd/system/rpc-statd.service:14: PIDFile= references path below legacy directory /var/run/, updating /var/run/rpc.statd.pid → /run/rpc.statd.pid; please update the unit file accordingly.
[    9.392830] systemd[1]: /usr/lib/systemd/system/nfs-blkmap.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/blkmapd.pid → /run/blkmapd.pid; please update the unit file accordingly.
[    9.416486] systemd[1]: /usr/lib/systemd/system/chronyd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/chrony/chronyd.pid → /run/chrony/chronyd.pid; please update the unit file accordingly.
[    9.458979] systemd[1]: /etc/systemd/system/teamviewerd.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly.
[    9.463063] systemd[1]: /usr/lib/systemd/system/sssd.service:11: PIDFile= references path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly.
[    9.465858] systemd[1]: /usr/lib/systemd/system/mdmonitor.service:6: PIDFile= references path below legacy directory /var/run/, updating /var/run/mdadm/mdadm.pid → /run/mdadm/mdadm.pid; please update the unit file accordingly.
[    9.634570] EXT4-fs (sda1): re-mounted. Opts: (null)
[   10.029808] systemd-journald[474]: File /run/log/journal/b3589d369beb4f749f1526bee669f3c7/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   10.061137] systemd-journald[474]: Received request to flush runtime journal from PID 1
[   10.613498] kauditd_printk_skb: 37 callbacks suppressed
[   10.613500] audit: type=1130 audit(1557394198.767:52): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-backlight@backlight:acpi_video0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.627668] audit: type=1130 audit(1557394198.782:53): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-backlight@backlight:acpi_video1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.695272] audit: type=1130 audit(1557394198.849:54): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-backlight@backlight:radeon_bl0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.708906] audit: type=1130 audit(1557394198.863:55): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.712763] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[   10.712852] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20181213/utaddress-204)
[   10.712860] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.712864] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.P0P2.PEGP.GPIO) (20181213/utaddress-204)
[   10.712869] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_GPE.GPIO) (20181213/utaddress-204)
[   10.712875] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181213/utaddress-204)
[   10.712880] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.712881] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.P0P2.PEGP.GPIO) (20181213/utaddress-204)
[   10.712886] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_GPE.GPIO) (20181213/utaddress-204)
[   10.712891] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181213/utaddress-204)
[   10.712896] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.712897] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.P0P2.PEGP.GPIO) (20181213/utaddress-204)
[   10.712902] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_GPE.GPIO) (20181213/utaddress-204)
[   10.712907] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20181213/utaddress-204)
[   10.712911] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   10.712912] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   10.739915] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   10.822908] media: Linux media interface: v0.10
[   10.824548] hp_wmi: query 0xd returned error 0x5
[   10.824648] input: HP WMI hotkeys as /devices/virtual/input/input16
[   10.850019] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   10.851526] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   10.895168] wl: loading out-of-tree module taints kernel.
[   10.895175] wl: module license 'MIXED/Proprietary' taints kernel.
[   10.895176] Disabling lock debugging due to kernel taint
[   10.899935] wl: module verification failed: signature and/or required key missing - tainting kernel
[   10.915618] videodev: Linux video capture interface: v2.00
[   10.945002] snd_hda_intel 0000:00:1b.0: Linked as a consumer to 0000:00:02.0
[   10.945078] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   10.946583] eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)

[   10.948901] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   10.994255] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[   11.006826] audit: type=1130 audit(1557394199.161:56): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.011128] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC270: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   11.011133] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.011135] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   11.011137] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.011139] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.011142] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   11.011144] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.056923] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   11.057055] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[   11.070928] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b1aa)
[   11.074905] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[   11.074909] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[   11.074912] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[   11.075050] input: HP Webcam-101: HP Webcam-101 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input20
[   11.077429] usbcore: registered new interface driver uvcvideo
[   11.077430] USB Video Class driver (1.1.1)
[   11.080350] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   11.090826] iTCO_vendor_support: vendor-support=0
[   11.094996] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.095089] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[   11.102903] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.143485] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: Could not read FW version
[   11.143489] mei mei::55213584-9a29-4916-badf-0fb7ed682aeb:01: FW version command failed -5
[   11.157250] wl 0000:03:00.0 wlp3s0: renamed from eth0
[   11.265576] audit: type=1130 audit(1557394199.419:57): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.360670] audit: type=1130 audit(1557394199.515:58): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.419368] audit: type=1130 audit(1557394199.573:59): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.419374] audit: type=1131 audit(1557394199.573:60): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.453686] loop: module loaded
[   11.493989] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   11.593001] audit: type=1130 audit(1557394199.747:61): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.803327] RPC: Registered named UNIX socket transport module.
[   11.803330] RPC: Registered udp transport module.
[   11.803331] RPC: Registered tcp transport module.
[   11.803332] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.816599] random: crng init done
[   12.816602] random: 7 urandom warning(s) missed due to ratelimiting
[   14.958628] RTL8201CP Ethernet r8169-200:00: attached PHY driver [RTL8201CP Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[   15.043674] r8169 0000:02:00.0 enp2s0: Link is Down
[   16.352073] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   16.385818] tun: Universal TUN/TAP device driver, 1.6
[   16.389390] virbr0: port 1(virbr0-nic) entered blocking state
[   16.389394] virbr0: port 1(virbr0-nic) entered disabled state
[   16.389506] device virbr0-nic entered promiscuous mode
[   16.660209] virbr0: port 1(virbr0-nic) entered blocking state
[   16.660214] virbr0: port 1(virbr0-nic) entered listening state
[   16.777432] virbr0: port 1(virbr0-nic) entered disabled state
[   34.649611] fuse init (API version 7.28)
[   35.768261] rfkill: input handler disabled
[   37.373771] show_signal: 4 callbacks suppressed
[   37.373774] traps: light-locker[1964] trap int3 ip:7fb7a902e1c5 sp:7ffdcb94b060 error:0 in libglib-2.0.so.0.6000.1[7fb7a8ff3000+82000]
[   66.472034] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control off
[   66.472050] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   69.242944] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   87.065381] r8169 0000:02:00.0 enp2s0: Link is Down
[  141.233743] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow control off
[  146.548079] ERROR @wl_cfg80211_disconnect : 
[  146.548081] error (-1)
[  148.918447] ERROR @wl_cfg80211_scan : 
[  148.918450] WLC_SCAN error (-22)
[  281.430372] ERROR @wl_cfg80211_scan : 
[  281.430376] WLC_SCAN error (-22)

Non in linea

#10 09-05-2019 15:45:30

silvio
Fedora nel sangue
Da Mercato San Severino (Sa)
Registrato: 05-01-2007
Messaggi: 1'358

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

SE non ci sono controindicazioni che non conosco penso si possa usare la soluzione qui proposta:

https://forum.fedoraonline.it/viewtopic.php?id=25371


ho provato la soluzione questo il mio risultato:

(root@localhost ~)# dnf install akmod-wl kernel-devel

(omesso la ricerca dei repo)

Package akmod-wl-6.30.223.271-24.fc30.i686 is already installed.
Package kernel-devel-5.0.9-200.fc29.i686 is already installed.
Package kernel-devel-5.0.10-200.fc29.i686 is already installed.
Package kernel-devel-5.0.11-300.fc30.i686 is already installed.
Dipendenze risolte.
Nessuna operazione da compiere.
Fatto!

Continua a non collegarsi. Ciccioduc può fare la stessa prova.
Attendo la vostra opinione
Silvio

Ultima modifica di silvio (09-05-2019 17:47:38)


Qualcuno dice sempre che è impossibile fare qualcosa che qualcun altro sta facendo da qualche altra parte.

Non in linea

#11 09-05-2019 23:36:25

alciregi
Greenhorn
Registrato: 08-08-2017
Messaggi: 9

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

Il modello della scheda è diverso, ma potrebbe essere lo stesso problema?

https://ask.fedoraproject.org/t/cant-co … driver/482

O anche questo

https://ask.fedoraproject.org/t/wifi-no … dora/827/6

Non in linea

#12 10-05-2019 08:30:09

silvio
Fedora nel sangue
Da Mercato San Severino (Sa)
Registrato: 05-01-2007
Messaggi: 1'358

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

Il problema è sempre delle Broadcom.
Ho fatto aggiornamento. Ancora non va. Penso che la cosa migliore sia aspettare l'aggiornamento che attiva tutto.


Qualcuno dice sempre che è impossibile fare qualcosa che qualcun altro sta facendo da qualche altra parte.

Non in linea

#13 10-05-2019 09:00:07

ciccioduc
Appena sbarcato sul forum
Registrato: 16-04-2019
Messaggi: 14

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

Silvio ho provato

dnf install akmod-wl kernel-devel

Ma non cambia nulla

Non in linea

#14 10-05-2019 09:12:42

ciccioduc
Appena sbarcato sul forum
Registrato: 16-04-2019
Messaggi: 14

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

alciregi ha scritto:

Il modello della scheda è diverso, ma potrebbe essere lo stesso problema?

https://ask.fedoraproject.org/t/cant-co … driver/482

O anche questo

https://ask.fedoraproject.org/t/wifi-no … dora/827/6


Risolto seguendo questo post https://ask.fedoraproject.org/t/wifi-no … dora/827/6

In pratica ho aggiunto

[device]
wifi.scan-rand-mac-address=no

in /etc/NetworkManager/NetworkManager.conf

Non in linea

#15 10-05-2019 15:32:58

silvio
Fedora nel sangue
Da Mercato San Severino (Sa)
Registrato: 05-01-2007
Messaggi: 1'358

Re: [Risolto] Problema wi-fi scheda Broadcom BCM4313

Ciccioduc ho messo la riga in fondo ma non va lo stesso.
Ho sbagliato qualcosa?

[logging]
# When debugging NetworkManager, enabling debug logging is of great help.
#
# Logfiles contain no passwords and little sensitive information. But please
# check before posting the file online. You can also personally hand over the
# logfile to a NM developer to treat it confidential. Meet us on #nm on freenode.
# Please post full logfiles except minimal modifications of private data.
#
# You can also change the log-level at runtime via
#   $ nmcli general logging level TRACE domains ALL
# However, usually it's cleaner to enable debug logging
# in the configuration and restart NetworkManager so that
# debug logging is enabled from the start.
#
# You will find the logfiles in syslog, for example via
#   $ journalctl -u NetworkManager
#
# Note that debug logging of NetworkManager can be quite verbose. Some messages
# might be rate-limited by the logging daemon (see RateLimitIntervalSec, RateLimitBurst
# in man journald.conf).
#
#level=TRACE
#domains=ALL

[device]
#wifi.scan-rand-mac-address=no

Ultima modifica di silvio (10-05-2019 15:44:19)


Qualcuno dice sempre che è impossibile fare qualcosa che qualcun altro sta facendo da qualche altra parte.

Non in linea

Piè di pagina