Configurazione scanner della multifunzione Epson stylus Office 305 F

Buongiorno a tutti, è la prima volta che scrivo premetto che sono solo un neofita, ma mi sono deciso di scrivere perché lo scanner della multifunzione Epson Stylus Office 305 F non vuole funzionare, il mio SO è Fedora 18, la stampante funzione e si è autoconfigurata senza problemi, i drivers aggiornati sono sul sito epson:

driver di stampa:
http://download.ebz.epson.net/dsc/du/02/DriverDownloadInfo.do?LG2=IT&CN2=&DSCMI=16830&DSCCHK=f5ea914b55fdf1f2fa4adf60a09936ec6834157b

Epson Scan:
http://download.ebz.epson.net/dsc/du/02/DriverDownloadInfo.do?LG2=IT&CN2=&DSCMI=21580&DSCCHK=fc9bb422d982caa5b3624bbcde36cf92e1000838
Qualcuno mi può indicare la strada giusta seguendomi passo passo? Aggiungo sotto con il comando lsusb e quello che mi dà il sistema…
Grazie per la collaborazione

[stefano@localhost ~]$ lsusb
Bus 001 Device 002: ID 04b8:0863 Seiko Epson Corp. ME OFFICE 620F Series/Stylus Office BX305F/BX305FW/TX320F
Bus 001 Device 004: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 003: ID 1d19:1101 Dexatek Technology Ltd. DK DVB-T Dongle
Bus 005 Device 002: ID 0a5c:2100 Broadcom Corp. Bluetooth 2.0+eDR dongle
Bus 009 Device 002: ID 2109:0811
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 005: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader Controller
Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 006: ID 0ac8:3420 Z-Star Microelectronics Corp. Venus USB2.0 Camera
Bus 002 Device 007: ID 066f:4200 SigmaTel, Inc. STIr4200 IrDA Bridge
[stefano@localhost ~]$

Xsane non lo riconosce???

Purtroppo no…ho comunque installato tramite terminale XSANE…per adesso non vuole saperne, qualche tempo fà a onor del vero con Fedora 17 ho avuto lo stesso problema…mi rivolsi al forum di linux-magazine e dopo quasi 2 mesi di corrispondenza risolsi il problema con il loro aiuto e mi guidarono passo passo, ho pensato bene di rifare la stessa procedura ma stavolta niente anche se devo dire la cosa che ho notato i drivers sono leggermente diversi, credo più evoluti, quelli vecchi non sono raggiungibili e il vecchio sito avasys non dà più disponibilità per il download e rimanda al sito Epson.
Cosa mi suggerisci…???

[root@localhost stefano]# rpm -qa|grep -i iscan
[root@localhost stefano]# scanimage -L
device `v4l:/dev/video0’ is a Noname Sirius USB2.0 Camera virtual device
[root@localhost stefano]# sane-find-scanner

sane-find-scanner will now attempt to detect your scanner. If the

result is different from what you expected, first make sure your

scanner is powered up and properly connected to your computer.

No SCSI scanners found. If you expected something different, make sure that

you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04b8, product=0x0863) at libusb:001:002
found USB scanner (vendor=0x1d19 [Realtek], product=0x1101 [Rtl2832UDVB]) at libusb:002:003
found USB scanner (vendor=0x066f Sigmatel Inc ], product=0x4200 IrDA/USB Bridge]) at libusb:002:007

Your USB scanner was (probably) detected. It may or may not be supported by

SANE. Try scanimage -L and read the backend’s manpage.

Not checking for parallel port scanners.

Most Scanners connected to the parallel port or other proprietary ports

can’t be detected by this program.

Quello che mi dà…come se non vedesse i drivers?boohh

Forse è il caso di leggere http://forum.fedoraonline.it/viewtopic.php?id=20229 post

Chiedo scusa ma non sò cosa sono i tag…

inserire il codice in maniera che faciliti la lettura, ad esempio così:

[code]

sane-find-scanner

sane-find-scanner will now attempt to detect your scanner. If the

result is different from what you expected, first make sure your

scanner is powered up and properly connected to your computer.

No SCSI scanners found. If you expected something different, make sure that

you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04b8, product=0x0863) at libusb:001:002
found USB scanner (vendor=0x1d19 [Realtek], product=0x1101 [Rtl2832UDVB]) at libusb:002:003
found USB scanner (vendor=0x066f Sigmatel Inc ], product=0x4200 IrDA/USB Bridge]) at libusb:002:007

Your USB scanner was (probably) detected. It may or may not be supported by

SANE. Try scanimage -L and read the backend’s manpage.

Not checking for parallel port scanners.

Most Scanners connected to the parallel port or other proprietary ports

can’t be detected by this program.[/code]

basta inserire le parole chiavi code e / code in questo modo:

 [code] codice da evidenziare [/code] 

http://download.ebz.epson.net/dsc/du/02/DriverDownloadInfo.do?LG2=IT&CN2=&DSCMI=21580&DSCCHK=fc9bb422d982caa5b3624bbcde36cf92e1000838

se scarichi da qui i driver in formato rpm con Xsane non funziona???

e qui ti dice quali utilizzare in funzione della tua distribuzione

http://download.ebz.epson.net/faq/linux/faq_ls_00002.html