Masterizzazione DVD.iso con brasero ultima versione

Fedora Linux Hardware
#1

ho letto l’help on line di brasero…anche un disabile ci riuscirebbe…basta usare il tasto destro del mouse sul file scaricato (nel mio caso Fedora 10 DVD.x86_64.iso) e nel menu’ a comparsa selezionare scrivi su disco…si apre la finestra con il pulsante per iniziare la masterizzazione…prima di iniziare nella finestra proprieta’ ho attivato l’ opzione -simulazione- ma sia con la velocita massima sia con 16x…la simulazione da errore…qualcuno ha riscontrato lo stesso problema???

#2

Prova con questo comando, vediamo se ti dà errori:

[code]
$ cd directory_contenente_immagine-iso
$ su
password di root

cdrecord dvd_simul -v dev=/dev/cdrom cd.iso [/code]

dove cd.iso è il nome dell’immagine.

#3

grazie trpost…di seguito l’output della shell:

[root@hp ~]# cdrecord dvd_simul -v dev=/dev/cdrom Fedora-10-x86_64-DVD.iso
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: ‘/dev/cdrom’
devname: ‘/dev/cdrom’
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'hp ’
Identification : 'DVD-RAM GH40L ’
Revision : ‘RB0E’
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 17530 kB/s 99x CD 12x DVD
FIFO size : 4194304 = 4096 KB
wodim: No such file or directory. Cannot open ‘dvd_simul’.

#4

In quale directory si trova l’immagine ?

#5

[f0@hp ~]$ corrisponde alla cartella Home di f0 dove f0 è il nome utente

#6 
$ cd /home/fo
$ su -c 'cdrecord dvd_simul -v dev=/dev/cdrom cd.iso'

Ti richiederà la password

#7

[f0@hp ~]$ cd /home/f0
[f0@hp ~]$ su -c 'cdrecord dvd_simul -v dev=/dev/cdrom Fedora-10-x86_64-DVD.iso

rimane cosi’ …non succede nulla…

#8

[quote=Jeeg]
[f0@hp ~]$ cd /home/f0
[f0@hp ~]$ su -c 'cdrecord dvd_simul -v dev=/dev/cdrom Fedora-10-x86_64-DVD.iso

rimane cosi’ …non succede nulla…[/quote]

C’è un errore di battitura.

$ su -c 'cdrecord dvd_simul -v dev=/dev/cdrom Fedora-10-x86_64-DVD.iso'
#9

è lo stesso comando di prima…in altra forma
infatti da lo stesso output

[f0@hp ~]$ cd /home/f0
[f0@hp ~]$ su -c ‘cdrecord dvd_simul -v dev=/dev/cdrom Fedora-10-x86_64-DVD.iso’
Password:
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: ‘/dev/cdrom’
devname: ‘/dev/cdrom’
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'hp ’
Identification : 'DVD-RAM GH40L ’
Revision : ‘RB0E’
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 17530 kB/s 99x CD 12x DVD
FIFO size : 4194304 = 4096 KB
wodim: No such file or directory. Cannot open ‘dvd_simul’.

#10

Mio errore:

$ cd /home/f0 $ su -c 'cdrecord driver=dvd_simul -v dev=/dev/cdrom Fedora-10-x86_64-DVD.iso'

Scusami, è da tanto che non uso questo comando.
Inserisci il dvd vuoto, vediamo se testa la masterizzazione.

#11

la simulazione funziona…viene completata… c’è solo un
wodim:WARNING…scusa la curiosità…perché non funziona con i comandi Desktop???

la shell:

[f0@hp ~]$ su -c ‘cdrecord driver=dvd_simul -v dev=/dev/cdrom Fedora-10-x86_64-DVD.iso’
Password:
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: ‘/dev/cdrom’
devname: ‘/dev/cdrom’
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'hp ’
Identification : 'DVD-RAM GH40L ’
Revision : ‘RB0E’
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
wodim: WARNING: Trying to use other driver on known device.
Using simulation DVD-R driver for timing/speed tests (dvd_simul).
Driver flags : DVD
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1966080 = 1920 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 17388 kB/s 98x CD 12x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 3979 MB
Total size: 4569 MB (452:43.33) = 2037250 sectors
Lout start: 4569 MB (452:45/25) = 2037250 sectors
Current Secsize: 2048
Simulation drive buffer size: 1024 KB
Maximum reserve time in drive buffer: 756.736 ms for speed 1x
Blocks total: 2464153 Blocks current: 2464153 Blocks remaining: 426903
Simulation drive buffer size: 1024 KB
Maximum reserve time in drive buffer: 378.368 ms for speed 2x
Starting to write CD/DVD at speed 2.0 in real TAO mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer … input buffer ready.
Starting new track at sector: 0
Track 01: 3979 of 3979 MB written (fifo 100%) 2.1x.
Track 01: Total bytes read/written: 4172283904/4172283904 (2037248 sectors).
Remaining reserve time in drive buffer: 388.750 ms
Minimum reserve time in drive buffer: 22.928 ms
Writing time: 1506.852s
Average write speed 2.0x.
Fixating…
Fixating time: 0.000s
wodim: fifo had 65718 puts and 65718 gets.
wodim: fifo was 0 times empty and 65343 times full, min fill was 73%.
[f0@hp ~]$

#12

la simulazione funziona…viene completata… c’è solo un
wodim:WARNING. vedi messaggio precedente per la shell…
è possibile anche masterizzare realmente un disco DVD con autorun?
.

#13

Non mi sembra ci siano problemi di masterizzazione.
Il warning forse è dovuto ad un non pieno riconoscimento del dvd.

Proverei a masterizzare. Se vuoi farlo da terminale:

$ su -c 'cdrecord -eject -v dev=/dev/cdrom Fedora-10-x86_64-DVD.iso'
#14

Carissimo trpost…la masterizzazione inizia …ma dopo qualche decina di secondi …trova un errore …si ferma ed epelle il DVD…ecco il resoconto—

[f0@hp ~]$ su -c ‘cdrecord -eject -v dev=/dev/cdrom Fedora-10-x86_64-DVD.iso’
Password:
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: ‘/dev/cdrom’
devname: ‘/dev/cdrom’
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.10
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'hp ’
Identification : 'DVD-RAM GH40L ’
Revision : ‘RB0E’
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 17626 kB/s 100x CD 12x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 3979 MB
Total size: 4569 MB (452:43.30) = 2037248 sectors
Lout start: 4569 MB (452:45/23) = 2037248 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 261248
Speed set to 22160 KB/s
Starting to write CD/DVD at speed 17.0 in real unknown mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer … input buffer ready.
Performing OPC…
Starting new track at sector: 0
Track 01: 0 of 3979 MB written.Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 0C 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 40s

write track data: error after 0 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Writing time: 37.954s
Average write speed 111.0x.
Fixating…
Fixating time: 0.013s
wodim: fifo had 64 puts and 1 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

#15

Dal mio ultimo post avrai capito che non ero pienamente sicuro della buona riuscita della masterizzazione; vero ?

Non mi viene in mente nessuna risoluzione; ti chiederei per curiosità la marca del dvd.

#16

questo tipo di PC credo sia famoso…ho visto molta pubblicita’ nei negozi di computer…l’ho comprato due settimane fa’

computer HP Pro 3015 MT

Dalla documentazione risulta il seguente hardware:

Processore AMD Athlon™ X2 Dual Core 215(2,7 GHz 2 MB di cache L2 Front Side Bus a 4000 MHz)

Chipset NVIDIA MCP78OV

““Unità dischi ottici Unità DVD+/-RW SuperMulti LightScribe SATA”” (in effetti sul cassetto c’è scritto
lightScribe)

Scheda grafica NVIDIA GeForce 9100 integrata

Pensi sia un difetto hardware???

#17

Mi riferivo al produttore del dvd-r che usi per masterizzare (philips, verbatim, sony, …).

Hai un masterizzatore lightscribe: ti permette di creare cd/dvd personalizzati graficamente.

#18

DVD-R Verbatim 4.7 Gb 16x speed vitesse 120 min

provo con un altro DVD…

#19

Niente da fare identico risultato…non si capisce dalla shell che errore lo blocca???