[Risolto] Olicard 145 e Fedora

Fedora Linux Hardware
#1

Ciao a tutti,
qualcuno mi aiuta con il far funzionare la chiavetta internet olicard 145?
Ho già messo usb_modeswitch solo che wvdial non la vede.

#2

togli ed inserisci la chiavetta, attendi qualche secondo poi posta:

$ dmesg|tail
#3

Ecco:

[agosh@fucua ~]$ dmesg|tail
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
scsi 5:0:0:0: Direct-Access     USBModem MMC Storage      2.31 PQ: 0 ANSI: 2
sd 5:0:0:0: Attached scsi generic sg1 type 0
sd 5:0:0:0: [sdb] Attached SCSI removable disk
#4

ok.
ora dai da root:

# eject /dev/sdb

aspetta un minuto poi posta:

[code]# cat /var/log/messages| tail -n 50

lsusb[/code]

#5 

[root@fucua agosh]# cat /var/log/messages| tail -n 50
Dec 13 14:35:21 fucua NetworkManager[1015]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Dec 13 14:35:21 fucua NetworkManager[1015]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Dec 13 14:35:21 fucua avahi-daemon[1035]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.64.
Dec 13 14:35:21 fucua avahi-daemon[1035]: New relevant interface wlan0.IPv4 for mDNS.
Dec 13 14:35:21 fucua avahi-daemon[1035]: Registering new address record for 192.168.1.64 on wlan0.IPv4.
Dec 13 14:35:22 fucua NetworkManager[1015]: <info> (wlan0): device state change: 7 -> 8 (reason 0)
Dec 13 14:35:22 fucua NetworkManager[1015]: <info> Policy set 'Auto Fuji' (wlan0) as default for IPv4 routing and DNS.
Dec 13 14:35:22 fucua NetworkManager[1015]: <info> Updating /etc/hosts with new system hostname
Dec 13 14:35:22 fucua NetworkManager[1015]: <info> Activation (wlan0) successful, device activated.
Dec 13 14:35:22 fucua NetworkManager[1015]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Dec 13 14:35:22 fucua nm-dispatcher.action: nm_dispatcher_action: Invalid connection: '(null)' / 'connection setting not found' invalid: 1
Dec 13 14:35:22 fucua ntpd[1162]: Listen normally on 4 wlan0 192.168.1.64 UDP 123
Dec 13 14:35:22 fucua ntpd[1162]: Listen normally on 5 wlan0 fe80::eee:e6ff:fe90:60af UDP 123
Dec 13 14:35:23 fucua bluetoothd[1155]: Can't init device hci0: Connection timed out (110)
Dec 13 14:35:23 fucua dbus-daemon: [system] Rejected send message, 1 matched rules; type="error", sender=":1.9" (uid=0 pid=1150 comm="/usr/sbin/bluetoothd) interface="(unset)" member="(unset)" error name="org.bluez.Error.Failed" requested_reply=0 destination=":1.49" (uid=500 pid=1735 comm="bluetooth-applet))
Dec 13 14:35:24 fucua ntpd_intres[1175]: DNS 0.fedora.pool.ntp.org -> 65.182.224.60
Dec 13 14:35:24 fucua ntpd_intres[1175]: DNS 1.fedora.pool.ntp.org -> 207.171.7.152
Dec 13 14:35:24 fucua ntpd_intres[1175]: DNS 2.fedora.pool.ntp.org -> 74.207.249.60
Dec 13 14:35:24 fucua ntpd_intres[1175]: DNS 3.fedora.pool.ntp.org -> 207.171.7.151
Dec 13 14:35:32 fucua ntpd[1162]: 0.0.0.0 c61c 0c clock_step +0.362103 s
Dec 13 14:35:32 fucua ntpd[1162]: 0.0.0.0 c614 04 freq_mode
Dec 13 14:35:33 fucua ntpd[1162]: 0.0.0.0 c618 08 no_sys_peer
Dec 13 14:36:49 fucua kernel: usb 1-1: new high speed USB device using ehci_hcd and address 4
Dec 13 14:36:49 fucua kernel: usb 1-1: New USB device found, idVendor=0b3c, idProduct=f000
Dec 13 14:36:49 fucua kernel: usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
Dec 13 14:36:49 fucua kernel: usb 1-1: Product: HSPA Data Card
Dec 13 14:36:49 fucua kernel: usb 1-1: Manufacturer: USBModem
Dec 13 14:36:49 fucua kernel: usb 1-1: SerialNumber: 1234567890ABCDEF
Dec 13 14:36:49 fucua kernel: scsi4 : usb-storage 1-1:1.0
Dec 13 14:36:50 fucua usb_modeswitch: switching 0b3c:f000 (USBModem: HSPA Data Card)
Dec 13 14:36:50 fucua kernel: usb 1-1: USB disconnect, address 4
Dec 13 14:36:50 fucua kernel: usb 1-1: new high speed USB device using ehci_hcd and address 5
Dec 13 14:36:50 fucua kernel: usb 1-1: New USB device found, idVendor=0b3c, idProduct=c003
Dec 13 14:36:50 fucua kernel: usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
Dec 13 14:36:50 fucua kernel: usb 1-1: Product: HSPA Data Card
Dec 13 14:36:50 fucua kernel: usb 1-1: Manufacturer: USBModem
Dec 13 14:36:50 fucua kernel: usb 1-1: SerialNumber: 1234567890ABCDEF
Dec 13 14:36:50 fucua kernel: scsi5 : usb-storage 1-1:1.4
Dec 13 14:36:50 fucua kernel: usbcore: registered new interface driver usbserial
Dec 13 14:36:50 fucua kernel: USB Serial support registered for generic
Dec 13 14:36:50 fucua kernel: usbcore: registered new interface driver usbserial_generic
Dec 13 14:36:50 fucua kernel: usbserial: USB Serial Driver core
Dec 13 14:36:50 fucua kernel: USB Serial support registered for GSM modem (1-port)
Dec 13 14:36:50 fucua kernel: usbcore: registered new interface driver option
Dec 13 14:36:50 fucua kernel: option: v0.7.2:USB Driver for GSM modems
Dec 13 14:36:50 fucua logger: usb_modeswitch: adding device ID b3c/c003/0: to driver "option"
Dec 13 14:36:51 fucua usb_modeswitch: switched to 0b3c:c003 (USBModem: HSPA Data Card)
Dec 13 14:36:51 fucua kernel: scsi 5:0:0:0: Direct-Access     USBModem MMC Storage      2.31 PQ: 0 ANSI: 2
Dec 13 14:36:51 fucua kernel: sd 5:0:0:0: Attached scsi generic sg1 type 0
Dec 13 14:36:51 fucua kernel: sd 5:0:0:0: [sdb] Attached SCSI removable disk

lsusb

[root@fucua agosh]# lsusb
Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard 
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0b3c:c003 Olivetti Techcenter 
Bus 001 Device 002: ID 1fea:0008  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
#6

da root:

[code]# eject /dev/sdb

modprobe usbserial vendor=0x0b3c product=0xc003[/code]

aspetta 10 secondi poi posta:

# dmesg|tail

ps: cosa è questo ? 1fea:0008 un’altra pennetta ?

#7

non ne ho idea.
è sempre presente, sia con chiavetta inserita che disinserita

#8

dai i comandi del post 6 e dacci l’output richiesto.

#9

scusa, avevo letto solo l’ultima riga:


[root@fucua agosh]# eject /dev/sdb
[root@fucua agosh]# modprobe usbserial vendor=0x0b3c product=0xc003
[root@fucua agosh]# dmesg|tail
usb 1-1: new high speed USB device using ehci_hcd and address 9
usb 1-1: New USB device found, idVendor=0b3c, idProduct=c003
usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=4
usb 1-1: Product: HSPA Data Card
usb 1-1: Manufacturer: USBModem
usb 1-1: SerialNumber: 1234567890ABCDEF
scsi9 : usb-storage 1-1:1.4
scsi 9:0:0:0: Direct-Access     USBModem MMC Storage      2.31 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg1 type 0
sd 9:0:0:0: [sdb] Attached SCSI removable disk
#10

non apre le porte seriali ttyUSB, proviamo a forzare:

# gedit /etc/udev/rules.d/99-olicard.rules

inserisci:
**
ATTRS{idVendor}==“0b3c”,ATTRS{idProduct}==“c003”,RUN+="/sbin/modprobe usbserial vendor=0x0b3c product=0xc003"
KERNEL==“ttyUSB[123]”,ACTION==“add”,ATTRS{idVendor}==“0b3c”,ATTRS{idProduct}==“c003”,RUN+="/bin/sleep 10"
**

salva chiudi dai un restart alla macchina.
alla ripartenza togli e metti la chiavetta, posta:

$ dmesg|tail
#11

funziona, sono connesso dalla chiavetta!
Finalmente!!

[agosh@fucua ~]$ dmesg|tail
usbserial_generic 1-2:1.2: generic converter detected
usb 1-2: generic converter now attached to ttyUSB2
usbserial_generic 1-2:1.3: generic converter detected
usb 1-2: generic converter now attached to ttyUSB3
scsi9 : usb-storage 1-2:1.4
usbserial_generic 1-2:1.5: generic converter detected
usb 1-2: generic converter now attached to ttyUSB4
scsi 9:0:0:0: Direct-Access     USBModem MMC Storage      2.31 PQ: 0 ANSI: 2
sd 9:0:0:0: Attached scsi generic sg1 type 0
sd 9:0:0:0: [sdb] Attached SCSI removable disk

Unico problema: ci mette 3-4 minuti a essere rilevato dal network manager.
Grazie virus! Appena ho tempo faccio una guida visto che molti utenti hanno problemi con questa chiavetta!
EDIT: altro problema: a volte non funziona, devo scollegare e ricollegare!

#12

de nada.

quando perdi la connessione posta :

# cat /var/log/messages |tail -n 60

vediamo perché modem-manager fa le bizze.

#13

non perde la connessione ma a volte non la prende proprio.
Appena capita posto

#14

bene così.